The 2003 Honda CR-V typically uses 24-inch driver-side and 19-inch passenger-side front wiper blades, plus an 11-inch rear blade.
The 2003 CR-V is part of the second generation (manufactured roughly 2002–2006). Front blade sizes are commonly 24 inches on the driver side and 19 inches on the passenger side, while the rear blade is usually 11 inches. Always confirm by checking the owner's manual or the packaging at purchase, since aftermarket options can vary slightly.
Front wiper blade sizes
Before listing the standard front-blade lengths for the 2003 CR-V, it helps to understand that blade length is defined by the length of the wiper arm that contacts the windshield. Using the correct sizes ensures full coverage and proper park position.
- Driver side: 24 inches
- Passenger side: 19 inches
Using the correct front blade lengths ensures optimal wiping performance and proper clearance along the windshield edge.
Measuring and compatibility tips
If you’re unsure about the exact fit, you can measure your current blades or verify with an auto parts retailer using your vehicle's year, make, model, and trim.
Rear wiper blade size
The rear wiper on the 2003 CR-V is typically smaller than the front blades. The most common size is 11 inches.
- Rear blade: 11 inches
Note that some non-standard rear setups or aftermarket replacements may differ slightly; when in doubt, measure the blade or check the replacement packaging for the correct length.
How to verify sizes
To ensure you buy the right blades, you can use several quick checks before purchasing.
- Consult the owner's manual for the exact blade lengths required for your trim.
- Remove a current blade and measure its length from tip to tip, including overhang.
- Use a reputable parts retailer’s lookup tool by entering year, make, model, and trim.
Verifying sizes helps prevent fit issues and ensures the blades clear the windshield properly and park correctly.
Summary
For a 2003 Honda CR-V, plan on front blades of 24 inches (driver) and 19 inches (passenger), with an 11-inch rear blade. Always double-check with the owner’s manual or packaging from the replacement blades to account for any variations in aftermarket options.