The front driver’s side blade is 26 inches and the front passenger’s side blade is 16 inches, while the rear blade is 12 inches. This configuration covers the standard specification for the 2020 Honda Fit in most markets. Always verify by checking your current blades or consulting your owner's manual or Honda’s parts catalog for your exact VIN.
Front Wiper Blade Sizes
The front wipers on the 2020 Honda Fit use two different lengths. Use the following standard measurements when shopping for replacements.
- Driver's side blade: 26 inches
- Passenger's side blade: 16 inches
Using the correct sizes ensures full coverage and avoids streaking. If you're in a region with a different trim level or market, confirm the exact sizes with OEM parts or your dealer.
Blade style options
When replacing front blades, you can choose among conventional, beam (flat) or hybrid designs. Beam blades tend to provide better contact at high speeds and in adverse weather, but always verify compatibility with your vehicle year and trim.
Rear Wiper Blade Size
The rear wiper for the 2020 Honda Fit is a single, shorter blade. The typical length is:
- Rear blade: 12 inches
Note that some regional versions or packages may use slightly different rear blade lengths. If in doubt, reference the OEM parts list for your VIN or measure the existing blade.
Rear blade installation tips
To install, lift the wiper arm, rotate the blade's connector to release, then slide on the replacement. Refit the arm and test the wipe pattern before driving. If you notice streaking after replacement, check for proper seating and clean the glass.
Summary
For the 2020 Honda Fit, the standard wiper blade sizes are 26 inches (driver-side) and 16 inches (front passenger-side) for the front, with a 12-inch blade for the rear. Always verify with your VIN or vehicle manual and consider your local climate when choosing blade type and replacement frequency.


