For most Kia Sorento models, the front driver-side blade is about 26 inches long, while the passenger-side blade is typically 16 to 18 inches, with a rear blade around 12 inches. Exact sizes vary by model year and market, so always verify for your specific SUV.
Wiper blade sizing can shift with each generation and regional specification, so owners should double-check the fit for their exact year. The guide below outlines the typical ranges and how to confirm the correct size for your Sorento.
Common front and rear wiper sizes across Sorento generations
The sizes listed here reflect common configurations in recent Sorento models and are intended as a starting point for buyers and owners. Always cross-check with your vehicle's documentation or a parts retailer using your year and market.
- Front wipers: Driver-side blade commonly 26 inches; passenger-side blade typically 16 or 18 inches, depending on the year and market.
- Rear wiper: Usually about 12 inches; some late-model Sorentos may use a slightly different rear blade length.
These ranges cover the majority of Sorento variants on the road today, but exact fit may vary by trim, equipment, and production changes.
How to verify the exact size for your Sorento
To confirm the precise wiper lengths for your vehicle, you can:
- Consult the owner's manual or the official Kia specification sheet for your model year.
- Use an online parts fit guide by entering your year, trim, and market, or contact a dealership parts desk with your VIN.
- Measure the currently installed blades and verify the replacement lengths recommended by reputable retailers.
Note: If your Sorento has a non-standard configuration or is a special edition for a specific market, sizes may differ slightly from the guidance above.
Summary
In brief, a typical Kia Sorento front wiper setup uses a 26-inch driver-side blade and a 16–18-inch passenger-side blade, with a 12-inch rear blade. Because sizes can vary by year, trim, and market, always confirm via your owner's manual or a trusted parts retailer before buying replacements.