A replacement thermostat for a 2013 Dodge Challenger typically costs between about $10 and $80 for the part itself, depending on brand and whether you buy it alone or as part of a housing kit; OEM Mopar parts are usually at the higher end. If you hire a shop, labor adds roughly $150 to $300.
The Challenger lineup for 2013 includes the 3.6L Pentastar V6 and, in certain trims, the 5.7L Hemi V8. Thermostats are sold in different configurations, some as bare units and others as part of a housing kit. Prices vary by retailer and whether you’re buying OEM or aftermarket; typical ranges are commonly seen at AutoZone, O'Reilly, Amazon, or dealer parts desks. Always verify fitment for your exact engine and VIN before purchasing.
What affects the price
Several factors determine the final price for a thermostat replacement.
- Brand and source: aftermarket vs OEM/Mopar parts.
- Engine variant and compatibility: 3.6L vs 5.7L, which can influence housing design.
- Kit contents: thermostat alone vs thermostat with gasket/O-rings or a complete housing kit.
- Condition and warranty: new parts with warranty versus lower-cost options with shorter coverage.
- Where you buy: online retailers, big-box auto parts stores, or a dealership.
In short, price can swing based on brand, kit contents, and where you purchase the part. Always confirm fitment using your Challenger’s VIN and engine code before ordering.
Typical price ranges and where to buy
Prices vary by source and configuration. Here are the common price bands you’ll encounter.
- Aftermarket thermostat (bare part): roughly $10–$30.
- OEM Mopar thermostat (bare part): roughly $40–$70.
- Thermostat and housing kit: roughly $60–$120.
- Dealership price (parts only, without labor): often higher, typically $60–$90 or more depending on the engine and stock.
Prices fluctuate with availability and location. Check exact part numbers for your vehicle and compare across retailers like AutoZone, O'Reilly, Advance Auto Parts, and the official Mopar/Chrysler parts portal to ensure you get the correct fit for your 2013 Challenger.
Engine variant considerations
3.6L Pentastar vs 5.7L Hemi: fit and price
The 2013 Challenger used both the 3.6L Pentastar V6 and, in higher trims, the 5.7L Hemi V8. While thermostats perform the same function, the housing design and mounting can differ, which may affect compatibility and price slightly. Always verify the exact part number and fitment for your VIN.
How to verify fit before purchase
Consult your vehicle’s VIN or service manual to pull the correct OEM part number, then cross-check it with retailer listings. If shopping online, use compatibility notes or ask a parts specialist to avoid ordering the wrong thermostat or housing.
Summary
For a 2013 Dodge Challenger, expect the thermostat part alone to cost roughly $10–$80 depending on brand and whether it’s sold as a bare unit or with housing. OEM Mopar parts are typically pricier than aftermarket options. Engine variant (3.6L vs 5.7L) can influence fitment and price, though differences are usually modest. Always confirm fitment with your VIN, compare prices across major retailers, and factor in potential labor costs if you’re having the job done professionally.