The Dodge Dart with a 2.0-liter engine generally takes about 5 quarts of engine oil when performing an oil change and replacing the filter, with a typical range of roughly 4.5 to 5.3 quarts depending on the filter and drain procedure.
Oil capacity overview
Oil capacity can vary slightly by model year and engine variant within the 2.0 L Tigershark family. To be sure, consult the owner's manual or the official service information for your specific Dart's year and VIN. The figures below reflect commonly cited values from manufacturers and automotive references.
Typical capacity and oil specification
Use the following as a baseline when planning an oil change, but verify before refilling:
- Oil capacity with filter: about 5.0 quarts (roughly 4.5–5.3 quarts depending on drain method and filter).
- Recommended oil viscosity: commonly 5W-20 synthetic or synthetic-blend; some climates may use 5W-30.
- Check the dipstick after the engine reaches its normal operating temperature; top off as needed to reach the full mark.
When in doubt or working with a specific model year, refer to the owner's manual or a dealer service bulletin to confirm exact capacity and oil grade for your Dart.
Summary
In short: expect about 5 quarts of engine oil with a filter for the 2.0 L Dodge Dart, with a practical range of 4.5 to 5.3 quarts. Always verify against your vehicle’s manual and follow the recommended oil specification for your climate and year.