Front wipers are typically 26 inches on the driver’s side and 16 inches on the passenger side, with a rear blade around 12 inches. Exact sizes can vary by model year and market, so always verify with your manual or a parts catalog.
Wiper blade sizes are a common source of confusion for C-HR owners because Toyota has produced several regional variants over the years. This guide provides the most commonly encountered lengths and shows you how to confirm the correct sizes for your specific vehicle, year, and region.
Front wiper blades: standard sizes
Front blade lengths are the most important for clear visibility and vary only slightly by year or market. The baseline configuration used on many Toyota C-HR models is 26 inches for the driver’s side and 16 inches for the passenger side, with some markets occasionally using 17 inches on the passenger side. Always check your owner’s manual or the exact parts catalog for your vehicle to confirm.
- Driver side: 26 inches
- Passenger side: 16 inches (some markets may use 17 inches; verify for your model year and region)
Conclusion: Use the 26"/16" configuration as the starting point, but confirm the exact lengths for your car to avoid fitment issues.
Rear wiper blade size
The rear wiper blade on most Toyota C-HR models is shorter than the front blades and is typically around 12 inches, though some years or regional variants may use a slightly different length (often 10–12 inches). Verify the exact rear blade size for your vehicle.
- Rear blade: about 12 inches (range 10–12 inches on some builds)
Conclusion: If you’re replacing the rear blade, plan for a 12-inch blade in most cases, but check your manual or the parts catalog for the precise measurement on your year and market.
How to verify the exact size for your C-HR
To ensure you buy the correct blades, follow these steps to confirm the lengths for your specific car:
- Consult the owner's manual or the Toyota official parts catalog for your model year and market.
- Inspect the current blades and check any size markings on the blade or packaging.
- Measure the blade length from the mounting point to the tip if the markings aren’t clear.
- Use a reputable parts retailer’s fitment tool by entering your VIN or year and trim to confirm compatibility.
Conclusion: Double-check with official sources or a trusted parts retailer to avoid ordering the wrong sizes, especially if you’re buying from aftermarket brands or in a different region.
Tips for choosing replacement blades
Consider these practical tips when selecting front and rear blades for your C-HR:
- Front blades: 26" driver, 16" passenger (verify for your year; some markets may use 17" on the passenger side)
- Rear blade: typically 12"; verify for your vehicle
- Blade type: beam (flat) blades are common on newer Toyota models and tend to offer better contact and wind resistance
- Climate considerations: winter blades or blades with silicone/coating can improve performance in cold or icy conditions
- Brand options: OEM Toyota blades or reputable aftermarket brands (e.g., Bosch, Valeo, Rain-X) known for fit and durability
Conclusion: When in doubt, choose OEM or a well-reviewed aftermarket blade set that explicitly lists compatibility with your C-HR’s year and market.
Summary
For most Toyota C-HR models, the front wipers are commonly 26 inches on the driver’s side and 16 inches on the passenger side, with a rear blade around 12 inches. However, sizes can vary by year and market, so the safest approach is to consult your owner's manual or a Toyota parts catalog, measure the current blades, or use a fitment tool from a reputable retailer. By confirming the exact specifications for your vehicle, you’ll ensure optimal visibility and a proper fit when you replace your wipers.