The typical price range is about $600 to $2,500, depending on engine configuration, whether you use OEM or aftermarket parts, and your local labor rates.
What drives the price
Costs are driven by the number of catalytic converters involved, the type of parts selected, labor duration, and any extra components that must be replaced during the service. The Dodge Durango’s exhaust setup varies by model year and engine, which can affect both part and labor costs.
- Parts costs: OEM catalytic converters are more expensive than aftermarket equivalents. The number of converters (one or two) and the engine type influence the part price. Expect a broad range, roughly $300–$1,900 depending on fitment and brand.
- Labor costs: Labor rates vary by region. A typical installation takes about 1.5–3.5 hours, translating to roughly $100–$240 per hour in many shops, though prices can be higher in metropolitan areas.
- Additional components and services: Replacing oxygen sensors, gaskets, clamps, disposal fees, and diagnostic checks can add $50–$300 or more to the bill.
Costs break down into three primary areas that influence the total price.
Concluding: The total price is a blend of parts, labor, and any ancillary components. Getting multiple quotes and verifying whether aftermarket parts meet local emissions requirements can help control costs.
Durango-specific considerations
Many Dodge Durango models use two catalytic converters in the exhaust stream, though some configurations may use a single unit. The exact arrangement depends on the model year and engine (for example, V6 versus V8). Higher costs typically come with dual-catalyst setups or if OEM parts are requested, and prices can vary significantly by state due to emissions regulations.
- Single catalytic converter: parts commonly range from $300–$900; labor around $120–$450; total typically $600–$1,350.
- Dual catalytic converters: parts commonly range from $600–$1,900+; labor around $200–$700; total typically $1,000–$2,500+.
- Other costs: Oxygen sensors, gaskets, clamps, disposal fees, and diagnostic charges can add $50–$300.
Common configurations and their cost implications include:
Concluding: If your Durango uses dual converters or you’re in a high-cost area, plan for the higher end of the range. Always verify the exact configuration for your specific vehicle year and engine to get an accurate quote.
Ways to save on replacement costs
Budget-conscious shoppers can consider several strategies to reduce the expected expense without compromising safety or emissions compliance.
Shop around for quotes
Obtain written estimates from multiple repair shops to compare parts and labor. Some shops may offer promotions or price-match guarantees.
Consider aftermarket parts (when allowed)
Aftermarket catalytic converters are often cheaper than OEM parts. Make sure the parts come with a warranty and meet your state’s emissions requirements.
Bundle related services
If other exhaust components or sensors need replacement soon, consider addressing them in the same service to minimize repeated labor charges.
Summary
Replacing a catalytic converter on a Dodge Durango generally runs between $600 and $2,500, influenced by the number of converters, part type (OEM vs aftermarket), labor rates, and any additional parts or diagnostics required. For the most accurate estimate, obtain quotes for your specific model year and engine configuration, and verify emissions compliance with any aftermarket choices. Planning ahead and shopping around can help you secure the best value.