The typical oil filter for a 2010 Honda Fit with the 1.5-liter engine is Honda Genuine Oil Filter part number 15400-PLM-A02. Some production runs may use nearby numbers depending on market, so it’s important to verify the exact part using your VIN or a reliable parts diagram.
Identifying the right filter for your 2010 Fit
To ensure you buy the correct oil filter, start by confirming your engine and cross-checking against official diagrams. Different production dates or regional variants can use slightly different part numbers, even within the same model year.
- Check the owner’s manual or the under-hood sticker for the recommended filter part number.
- Verify your engine code and date of manufacture, since some batch variations affect compatibility.
- Use the Honda parts catalog or a trusted retailer’s cross-reference to confirm the exact number for your VIN.
- Consider using a genuine Honda filter (15400-PLM-A02) as a baseline and compare aftermarket cross-references carefully.
With the correct part number confirmed, you’ll be able to shop confidently at a dealer, parts store, or online retailer and avoid mismatches in size or threading.
Where to buy and how to confirm compatibility
When shopping for the filter, you have several reliable options. Always double-check compatibility with your vehicle’s VIN to avoid mistakes, especially if ordering online.
- Honda dealership parts counter or certified service center.
- Major auto parts chains and their online stores, using the exact part number or VIN-assisted lookup.
- Online retailers that offer cross-reference tools for Honda oil filters.
Using VIN-based lookups or cross-reference guides helps ensure the filter you buy matches the threading, gasket size, and overall dimensions required by your car.
DIY replacement tips for the 2010 Fit
If you’re changing the oil filter yourself, follow these practical steps to complete the task safely and efficiently.
- Warm up the engine briefly, then park on a level surface and apply the parking brake. Raise the front of the car if needed and support securely with stands.
- Drain the engine oil from the drain plug into a suitable container, then replace the drain plug with a new crush washer if required.
- Use an oil filter wrench to loosen and remove the old filter counterclockwise. Be prepared for some oil spill; have rags or a catch pan ready.
- Wipe the filter mounting surface clean, apply a light coat of new oil to the gasket on the new filter, then thread it by hand until snug and give it a final ¾ turn (or per filter instructions).
- Replace the drain plug, add fresh oil according to the manual’s capacity, start the engine, and check for leaks. Recheck oil level after a short run and top off if needed.
Following these steps will help you complete a standard oil change with the correct filter in place and the engine properly lubricated.
Summary
For a 2010 Honda Fit, the commonly recommended oil filter is the Honda Genuine 15400-PLM-A02, though regional and production variations can occur. Confirm the exact part number using your VIN, the owner’s manual, or a trusted parts catalog. When shopping, consider the OEM option for compatibility and reliability, and use VIN-assisted lookups to avoid mismatches. Regular oil and filter changes are essential for engine longevity and performance.
What size is a Honda oil filter?
Measurements
| Item Dimensions | 10 x 6 x 1 inches |
|---|---|
| Thread Size | M14x1.5 |
| Item Weight | 3.2 ounces |
What does the PH7317 oil filter Fit?
Broad Compatibility: The PH7317 filter fits a wide range of Honda, Subaru, Nissan, and Acura vehicles from 2001 to 2023.
What type of oil does a 2010 Honda Fit take?
5W-20
What type of oil does a 2010 Honda Fit take? Honda recommends API-certified 5W-20 for many 2010 Fit engines; Coggin Honda Orlando also offers synthetic and synthetic-blend options for added protection and longevity.
What kind of oil filter does a 2010 Honda Fit take?
OEZ by Premium Guard – Oil Filter: Ideal for Any Type Oil, Same Filter Installed From The Factory (Part No. 15400-PLM-A02) Genuine Honda original equipment oil filter for your Honda vehicle. Engineered and specified by Honda, this is the same filter as that which would be installed by your dealer.