The front wiper blades for the Lexus NX300 are typically 26 inches on the driver’s side and 17 inches on the passenger side, with an 11-inch blade for the rear. This configuration covers the majority of NX300 models sold in recent years. Always verify the exact sizes for your specific year and market.
The NX300 line spans several model years and regional specifications, so sizes can vary slightly. The guidance below reflects the most common setup and how to confirm your exact measurements.
Front wiper blade sizes
Most NX300 variants use a two-blade front setup with different lengths for the driver and passenger sides. The sizes below represent the standard configuration for the majority of NX300 cars.
- Driver’s side: 26 inches
- Passenger’s side: 17 inches
When replacing, ensure you select blades that match these lengths and are compatible with your vehicle’s mounting type (hook, pin, or side-pin). If your model uses a different mounting style, adapters may be available.
How to verify your front blade size
Use the following steps to confirm the correct sizes for your NX300:
- Consult your owner's manual or the wiper blade section for the exact sizes.
- Check the existing blades for stamped length measurements, usually on the blade itself or packaging.
- Measure the length from the center of the blade to the tip at the edge of the windshield if you have any doubt.
Once confirmed, you can shop by part numbers or by general length to ensure a proper fit.
Rear wiper blade size
The NX300 generally uses a single rear wiper blade. The standard length for most NX300 models is 11 inches, though there can be minor variations by year or region.
- Rear blade: 11 inches
Always verify because some model years or regional variants may use a different rear blade size or mounting style.
How to verify your rear blade size
Follow these steps to confirm the rear blade length for NX300:
- Check the owner’s manual or the rear blade packaging for the stated length.
- Remove the rear blade and measure the blade edge length to confirm.
- If in doubt, bring the old blade to an auto parts store to compare lengths or ask staff to verify compatibility with your VIN.
After replacement, test the rear wiper to ensure full coverage without gaps or chatter.
Where to buy and how to pick replacements
You can source wiper blades for the NX300 from auto parts stores, dealership parts counters, or online retailers. When shopping, verify blade length, mounting type, and compatibility with your VIN to avoid mismatches.
Summary
For the Lexus NX300, the most common front wipers are 26 inches (driver) and 17 inches (passenger) with an 11-inch rear blade. Always verify against your specific year and market, as sizes can vary. Use the owner's manual, packaging, or a parts lookup by VIN to confirm before purchasing.