Front wiper blades on most Chevy Equinox models are 26 inches on the driver’s side and 24 inches on the passenger side; the rear blade is typically 11 inches. Exact sizes depend on year and trim, so check your owner's manual or the blade packaging when replacing.
The Equinox has gone through several generations since 2005, and blade sizes can vary by year and configuration. This article provides the common sizes and guidance on how to confirm the correct ones for your specific vehicle.
Front Wiper Blades
Below are the typical front blade sizes used on many Equinox models. Sizes can vary by generation, so verify for your exact year.
- Driver-side blade: 26 inches
- Passenger-side blade: 24 inches
In practice, the front wiper pair is usually 26" on the driver’s side and 24" on the passenger’s side for a wide range of Equinox years. To ensure a perfect fit, confirm with the owner’s manual or the packaging on the replacement blades.
Rear Wiper Blade
The rear wiper blade on the Equinox is smaller and less uniform across years. The common size is about 11 inches, with some years using 12 inches.
- Typical rear blade size: 11 inches
- Possible variation: 12 inches on certain years or trims
Check your vehicle's documentation or measure the existing blade to confirm the exact rear size for your year and trim.
How to Confirm Your Exact Size
Because the Equinox has multiple generations and possible variations, use these methods to verify your specific sizes before buying replacements.
Check the Owner's Manual and Parts Fitment
Look up the recommended wiper blade sizes for your exact model year and trim in the owner’s manual or on GM’s official maintenance resources. The size is often listed in the maintenance or wiper blade section, and some vehicles have the size printed on the blade housing.
- Check the sticker on the current blades
- Consult the owner's manual
- Ask a dealer or parts retailer with your VIN
Verifying with official sources or the existing blades helps ensure you purchase the correct size and avoid fit issues.
Replacement Tips
When buying replacements, you can select a matched front pair (26" driver, 24" passenger) and an 11" rear blade, or opt for a universal kit if your connector type differs.
- Raise the wiper arm carefully and locate the blade release mechanism.
- Depress the release tab and slide the old blade out of the connector.
- Attach the new blade by sliding it into the connector until it clicks into place.
- Lower the wiper arm back onto the windshield and test for proper contact.
Note that some Equinox models use different connector types, so choose blades with the correct end fitting for your car.
Summary
In short, the Chevy Equinox commonly uses 26-inch driver-side and 24-inch passenger-side front wiper blades, with an 11-inch rear blade. Always verify the exact sizes for your specific model year and trim by checking the owner’s manual, blade packaging, or a trusted parts retailer’s fitment guide to ensure compatibility.