For most Infiniti Q50 models, the typical front-wiper configuration is a 26-inch driver-side blade and a 17-inch passenger-side blade, with an 11-inch rear blade. This size pairing covers the majority of model years and trims, but exact specification can vary by year, market, and wiper connector type, so verify with your manual or dealer.
Front wiper blade sizes
Below are the sizes commonly used on Infiniti Q50 front windshields. Use them as a baseline, but confirm with your vehicle's documentation or a parts retailer since fitment can vary by year and market.
- Driver-side front blade: 26 inches
- Passenger-side front blade: 17 inches
In practice, this 26"/17" pairing is standard on many Q50 models in recent years. Some markets or trims may use a 24" passenger blade, but 17" is the typical length for North American configurations.
Rear wiper blade size
The Infiniti Q50 typically uses a single rear wiper blade around 11 inches long, though there can be minor variations by generation or market.
- Rear wiper blade: 11 inches
Always verify the rear blade length for your exact vehicle, especially if you are purchasing a full blade kit or multi-pack.
How to verify the exact size for your car
Use these steps to confirm the precise fit for your year and trim before purchasing new blades.
- Check the owner's manual or the Infiniti official parts guide for your VIN.
- Remove the current blades and measure their lengths end-to-end with a ruler.
- Compare lengths and connector types with replacement blade packaging from brands like Bosch, Rain-X, or Valeo.
- Match the connector style (hook, pin, or bayonet) to your wiper arms to ensure proper installation.
By following these steps, you reduce the risk of buying blades that don’t fit or seal properly on the windshield.
Seasonal and maintenance considerations
Climate can influence blade choice. Some drivers prefer silicone blades or models with protective coatings for extreme temperatures, while others favor beam blades for better contact on modern windshields. Regular inspection and replacement—typically every 6–12 months or whenever you notice streaking or skipping—helps maintain optimal visibility.
Summary
The Infiniti Q50 generally uses 26-inch driver-side and 17-inch passenger-side front wiper blades, with an 11-inch rear blade. Sizes can vary by year, market, and specific trim, so always verify with your VIN, owner's manual, or a trusted retailer to ensure a precise fit.
Related resources
For exact fitment guidance, consult your dealership, an authorized Infiniti parts catalog, or a reputable auto parts retailer, and reference your vehicle identification number (VIN) for precise compatibility.
Can I use 24 instead of 22 wiper blades?
Size matters to a point, just as long as you are about 1 inch higher or lower than your current wiper blade size. If you buy wiper blades that are too big, they might overlap or touch which will cause them to break.
Which window wiper does a Q50 2016 take?
TRICO Exact Fit – Conventional 26” Wiper Blade: Factory Performance (Part No. 26-1)
What size windshield wipers are on a 2020 Infiniti Q50 Red Sport?
2020 Infiniti Q50 Wiper Blades Size/Price Chart
| Car | Driver | Pass. |
|---|---|---|
| 2020 Infiniti Q50 | 26 in. | 17 in. |
What size windshield wipers do I need for Q50?
For 2014‑2022 INFINITI Q50 Windshield Wiper Blades 2 Pack Michelin Stealth Ultra 26 & 17 inch Size.