The rear wiper blade for the 2012 Honda Crosstour is 15 inches long.
This article explains the correct size, how to confirm it on your vehicle, and practical guidance for replacing the blade with OEM or aftermarket options.
Size verification
To ensure you install the right blade, verify the size by checking the owner's manual, inspecting the current blade for its length, or measuring the blade directly and cross-referencing with retailer or Honda parts catalogs.
In most cases for the 2012 Crosstour, the standard replacement rear blade is 15 inches, which fits the hatchback’s curved rear window and mounting arm.
How to confirm the exact size on your Crosstour before purchasing:
- Check the vehicle’s owner’s manual or the Honda parts catalog for the 2012 Crosstour to confirm the blade length.
- Inspect the current rear blade and look for a length indicator stamped on the blade itself.
- Measure the installed blade from tip to tip with a tape measure if needed, accounting for any curvature that might affect actual fitment.
- Use an auto parts retailer’s compatibility tool by entering year, make, and model to validate a 15-inch rear blade.
- When in doubt, consult a parts specialist at a Honda dealership or a trusted auto parts store.
Concluding note: If your Crosstour has an unusual or aftermarket modification, there’s a small chance the blade length could differ. Always verify with a trusted source before buying.
Replacement options
There are several good routes to replace a 15-inch rear blade, including original equipment manufacturer (OEM) options and reputable aftermarket brands. The following list outlines common choices and what to look for when shopping.
- OEM Honda rear wiper blade, 15 inches — guaranteed fit with Honda mounting hardware and factory performance.
- Aftermarket branded 15-inch rear blades from reputable manufacturers (e.g., Bosch, Rain-X, ANCO) that explicitly list compatibility with 2012 Crosstour or 15-inch rear blades for similar SUV/hatchback applications.
- Universal or adjustable-length 15-inch blades, provided the product specifies compatibility with the Crosstour’s mounting style and window geometry.
Conclusion: For simplicity and reliability, many drivers choose an OEM blade or a well-rated aftermarket 15-inch blade that explicitly lists compatibility with the 2012 Crosstour.
How to replace
Replacing a rear wiper blade is a straightforward DIY task. Follow these steps to install a fresh 15-inch blade correctly and ensure a proper seal and wipe performance.
- Lift the rear wiper arm away from the glass until it stays in a raised position.
- Locate the release mechanism on the wiper blade connector or the end cap where the blade attaches to the arm.
- Depress or slide the release to detach the old blade from the wiper arm.
- Take note of the blade’s orientation and slide the new 15-inch blade onto the arm until it clicks securely into place.
- Lower the wiper arm back onto the glass and gently test the wipe to ensure full coverage and no skipping.
- Dispose of the old blade and store the new blade in its packaging until use if you want to keep the extra parts.
Tools you may need
Typically, replacing a rear blade does not require tools, but having a pair of gloves and a microfiber cloth on hand can help prevent fingerprints on the glass and make handling easier.
If you prefer, a professional can perform the replacement quickly at a service center, especially if you’re unsure about the blade’s connector type or encounter resistance when removing the old blade.
Summary
The 2012 Honda Crosstour commonly uses a 15-inch rear wiper blade. Verify with the owner's manual, retailer compatibility tools, or by measuring the current blade. When replacing, choose an OEM 15-inch blade or a trusted aftermarket option, and follow the simple steps to swap the blade for optimal visibility in adverse weather conditions. Regular checks and timely replacements help maintain rear visibility and safety on the road.