The 2010 Honda Civic uses a 5-lug bolt pattern and standard wheel studs sized for common Honda maintenance and replacements. This article summarizes the official sizing you’re likely to encounter and what to verify when replacing wheels or studs.
The wheel studs on a 2010 Honda Civic are M12x1.5 with a 5x114.3 mm bolt pattern, and the studs are typically about 26–28 mm long.
Details and what it means for you
Understanding the exact wheel stud specifications helps you source correct replacements, choose the right lug nuts, and ensure safe mounting of wheels. Below are the core specs most owners need to know for a 2010 Civic (8th generation):
- Bolt pattern: 5x114.3 mm (5 lug holes, 114.3 mm apart)
- Stud diameter: 12 mm (M12)
- Thread pitch: 1.5 mm
- Typical stud length: approximately 26–28 mm
- Lug nut torque (recommended): about 80 ft-lbs (108 Nm); verify with the owner's manual or service sheet
These specifications generally apply to both front and rear wheels on the 2010 Civic, but you should confirm with OEM parts or a trusted repair guide if you’re working with a specific trim or aftermarket wheel setup.
Practical considerations for replacement and maintenance
When replacing wheel studs or sourcing lug nuts, use parts specified for the 2010 Civic or the exact VIN if possible. Mismatched pitch or diameter can affect wheel seating and safety. If you’re upgrading to different wheels, verify the fitment with a trusted technician to ensure compatible studs, seat type, and torque values.
Additional notes
Some service outlets may list minor variations by market or trim, but the common configuration for US-market 2010 Civics is 5x114.3 mm with M12x1.5 studs. Always measure if you’re unsure and consult Honda’s official parts catalog or a service manual for your specific vehicle.
Summary
For a 2010 Honda Civic, expect wheel studs sized M12x1.5 with a 5x114.3 mm bolt pattern, and a typical stud length around 26–28 mm. Lug nuts are torqued to roughly 80 ft-lbs (108 Nm). If you’re replacing components, rely on OEM specifications or a reputable service manual to confirm exact measurements for your vehicle’s trim and market.