The 2000 Honda CR-V’s 2.0-liter four-cylinder is rated at roughly 147 horsepower in US-spec form, giving a practical balance of performance and efficiency for the era.
Engine and power figures
The US-spec CR-V for 2000 used the B20B 2.0-liter engine. Officially, it produced 147 horsepower (SAE net) at about 6,000 rpm and around 132 lb-ft of torque at 4,500 rpm, figures that were typical for the first-generation CR-V's power output.
Key specifications for the US-market 2000 CR-V power output are summarized below.
- Engine: 2.0-liter inline-4 (B20B)
- Horsepower: 147 hp (SAE net) at 6,000 rpm
- Torque: 132 lb-ft (179 Nm) at 4,500 rpm
Note: Some sources round horsepower differently depending on testing standards and market; figures can appear as about 142–147 hp in various references.
Market variations
In markets outside the United States or when different rating standards are used, the power number can shift by a few horsepower. For example, some regions report slightly lower or higher net horsepower due to exhaust and emission calibration and labeling conventions. In general, the CR-V's 2.0-liter engine remains close to the mid- to high-140s horsepower range for that generation.
Performance in context
Horsepower is only one part of the equation. The first-generation CR-V emphasizes fuel efficiency, torque delivery at lower revs, and lightweight SUV dynamics. With a curb weight roughly around three thousand pounds and its available all-wheel-drive option, the vehicle offered adequate real-world acceleration for daily driving and highway merging during its era.
Summary
In summary, the 2000 Honda CR-V with the 2.0-liter B20B engine delivers about 147 horsepower (SAE net) and around 132 lb-ft of torque, with minor variations across markets and measurement standards. This power level reflects the model's practical, city-to-highway utility rather than performance-focused design.