The 2016 Nissan Sentra SV uses 26-inch wiper blades on the driver’s side and 17-inch blades on the passenger side for the front windscreen. If your car has a rear wiper, the typical rear blade size is 10 inches.
Wiper blade sizes are determined by the car’s windshield design and wiper arm configuration. This article outlines the standard front and possible rear sizes for the Sentra SV, how to verify them, and tips for choosing replacements that perform well in different weather conditions.
Front wiper blade sizes
Here are the typical front blade lengths used on the 2016 Sentra SV. Use these as the baseline when shopping for replacements.
- Driver-side front blade: 26 inches
- Passenger-side front blade: 17 inches
Confirm now or if you notice streaking or poor contact, you might have a differing size if you own a market-specific variant or a vehicle with aftermarket windshields. When shopping, you can provide the year, make, model, and trim to the parts counter to ensure fit.
Notes on sizing and fit
Some cars use a 25.5–26.0 inch blade and others use 16.5–17.5 inch blade depending on the blade style; the listed measurements correspond to the most common OEM sizes for the US-market Sentra SV. Always measure your current blades if possible.
Rear wiper blade size (if equipped)
Not all 2016 Sentra sedans come with a rear wiper, but some trims or regional versions may include one. If your Sentra SV has a rear wiper, the typical blade length is about 10 inches.
- Rear blade: 10 inches
To verify, check the owner’s manual or the original equipment blade length; if your car lacks a rear wiper, you can disregard this section.
How to verify rear blade size
Measure the blade you’re replacing or compare with the OEM part diagram to confirm a precise fit.
Choosing the right blade type and replacement tips
When replacing wiper blades, choosing the right style and material matters for visibility and durability in varying climates.
- Blade style: traditional frame blades are inexpensive and easy to install; beam blades provide better wiping with less flutter, especially at higher speeds.
- Material: silicone blades last longer and resist cracking in heat, though they can be pricier; traditional rubber blades are cheaper but may wear faster.
- Installation tips: follow the blade’s packaging instructions; ensure correct orientation and secure locking on the wiper arm. Replace both sides at the same time for even performance.
Proper fit and style improve wipe quality, reduce streaking, and prevent wind lift in high-speed driving. If in doubt, ask for a two-blade kit designed for the Sentra SV or seek help at an auto parts retailer.
Verification and sources
To confirm exact sizes for your vehicle, consult these reliable references.
- Owner’s manual under the maintenance or wipers section
- Nissan official parts catalog or dealership lookup by VIN
- Current replacement blade packaging and online fit guides
Cross-checking with official sources helps avoid buying the wrong size, particularly if you own a market-specific variant or plan to replace a rear blade if your sedan has one.
Summary
The 2016 Nissan Sentra SV typically uses 26-inch driver-side and 17-inch passenger-side front wiper blades, with a 10-inch rear blade if a rear wiper is present. Verify the size using the owner manual or parts lookup for your VIN, and consider beam-style blades for improved performance, especially in rain or snow. Replacing blades once they show streaking or skipping helps maintain clear visibility.