The horsepower of a Honda Accord with a 2.4-liter engine varies by year and market, generally ranging from about 150 to 189 horsepower. There is no widely recognized Honda model called “Accord Tao” in Honda’s global lineup. If you meant the standard Accord with a 2.4L engine, this article explains typical figures and how to verify the exact number for your car.
Is there a Honda Accord Tao?
There is no official model variant named “Accord Tao” in Honda’s current global lineup. The confusion may stem from regional nicknames, trim designations, or misreading a model code. To determine your car’s exact horsepower, it helps to know the model year and market. Below is a practical guide to what you’re likely dealing with when you see a 2.4-liter four-cylinder in an Accord.
What to watch for in model names
Honda uses engine codes and trim distinctions rather than a separate “Tao” designation. For precise horsepower, you’ll want to identify the engine code (for example, K24 or a turbocharged variant) and the model year.
Horsepower by era
These figures reflect typical outputs for the 2.4-liter four-cylinder engines used in the Honda Accord across major generations. Actual horsepower can vary by market, emissions equipment, and trim.
- 1998–2002: About 150–165 horsepower in the markets where 2.4-liter variants were offered.
- 2003–2007: Commonly around 160–166 horsepower for the 2.4-liter engines in most regions.
- 2008–2012: 2.4-liter variants often range from 177 to 190 horsepower, depending on emissions equipment and trim.
- 2013–2017: 2.4-liter i-VTEC versions generally around 189 horsepower (with some market variations).
- 2018 onward: Honda shifted toward turbocharged options (1.5L and 2.0L turbo) for the Accord in most markets, effectively ending the traditional 2.4L non-turbo option.
In short, the horsepower for a 2.4L Accord has varied widely across generations and regions. To know your exact figure, check the window sticker, engine code, or VIN for the precise specification.
How to verify horsepower for your specific car
To determine the exact horsepower of your particular Accord, use these sources and methods:
- Check the Monroneу (window) sticker or the owner’s manual for the listed horsepower specification.
- Inspect the engine bay badge for the exact engine code (e.g., K24) and look up the corresponding spec sheet for that year/market.
- Use the VIN to pull official build data from Honda’s site or trusted automotive databases (Edmunds, Kelley Blue Book, etc.).
- Contact a Honda dealer with your VIN for a definitive figure from the manufacturer’s records.
Providing the exact year, market, and trim will ensure you obtain the precise horsepower figure for your car.
Summary
Horsepower for the Honda Accord’s 2.4-liter engine is not fixed and has shifted with each generation. There is no official “Accord Tao” variant; if you’re seeking a precise number for a specific car, identify its year, market, and engine code, then consult the window sticker, VIN-derived specs, or a Honda dealer. In practice, expect ranges from roughly 150–189 horsepower depending on generation and region, with modern models moving away from the 2.4L non-turbo setup toward turbocharged options.