The 2020 Honda CR-V with the common 1.5-liter turbo engine typically takes 4.5 quarts (about 4.3 liters) of engine oil when you do an oil change and replace the filter.
Oil capacity varies by powertrain. The CR-V Hybrid uses a smaller engine and requires about 3.7 quarts (roughly 3.5 liters) with the filter. Always check the owner's manual for your exact configuration and the correct procedure for refilling.
Oil capacity by engine variant
Below are the typical capacities for the 2020 CR-V, assuming a full oil change with a new filter.
- Gasoline CR-V (1.5L turbo): 4.5 quarts (4.3 L) with filter
- CR-V Hybrid (2.0L Atkinson-cycle): 3.7 quarts (3.5 L) with filter
These figures can vary slightly by model year or engine specification. Always verify with the manual or the under-hood oil capacity label if available.
Oil type and refill guidance
The 2020 CR-V generally requires 0W-20 synthetic oil that meets API standards and Honda specifications. Use Honda Genuine 0W-20 or an equivalent fully synthetic oil that meets the same standards.
Maintenance considerations
Honda typically recommends oil changes at intervals guided by the vehicle’s maintenance minder system. Under normal conditions, many CR-V owners see 7,500 miles between changes, while harsher conditions or extended driving may shorten that interval.
Summary
For the standard 2020 CR-V with the 1.5L turbo engine, plan for about 4.5 quarts of oil when performing a full oil change with a new filter. The CR-V Hybrid uses about 3.7 quarts. Always confirm with the owner's manual for your exact configuration and use the recommended 0W-20 synthetic oil.