To lift the windshield wipers on a Genesis G70, simply pull the wiper arm away from the windshield until it locks in a raised position. This is safe to do with the ignition off and provides access for cleaning or blade replacement.
This guide explains how to safely raise the wipers, what to check before and after, and tips for replacing blades if needed. The process is similar to many modern cars, but always handle the arms gently to avoid damage to the glass or the wiper mechanism.
Preparation and safety
Before you lift the wipers, ensure the vehicle is parked, the ignition is off, and the parking brake is engaged. Keep your hands clear of the blade tips and avoid allowing the arms to snap back onto the glass, which can crack the windshield or bend the arms.
How to lift the wipers: step-by-step
Follow these steps to safely raise the wipers on the Genesis G70 for cleaning or blade maintenance.
- With the vehicle off and the wipers resting at the bottom, locate the wiper arm near its base.
- Grasp the arm firmly and gently pull it away from the glass until it stands at a raised angle (approximately 45–90 degrees from the windshield).
- If you are replacing the blade, use the blade's release mechanism to detach it from the wiper arm, then replace with a compatible blade.
- Lower the wiper arm back onto the glass slowly, keeping a light hold to prevent the blade from snapping back or hitting the windshield.
The raised position gives you clear access for blade maintenance or cleaning and helps prevent accidental contact with the glass during work.
Blade replacement tips
When replacing blades, ensure you have the correct blade length and a compatible connector for your Genesis G70. Blade designs can vary by year and trim, so check the owner’s manual or consult a parts retailer to confirm the right fit.
Before swapping blades, identify the connector type on the current blade and verify the length. Then follow these steps:
- Lift the wipers to the raised position as described above.
- Release the old blade from the wiper arm by pressing the release tab or using the blade’s detachment method, and slide it out.
- Attach the new blade by sliding it into the connector until it clicks securely.
- Lower the wiper arm back onto the glass and test with a slow sweep to confirm proper seating and contact.
If you have any difficulty detaching or attaching blades, consult the owner’s manual or a Genesis service professional to avoid damaging the arm or blade.
Maintenance and safety reminders
Regularly inspect the blades for wear, clean the blade edges with a soft cloth, and replace blades at the first sign of streaking or skipping. Gentle handling of the wiper arms during lifting prevents bending and ensures a long service life.
Blade compatibility notes
Blade compatibility depends on model year and trim. Always verify the correct blade length and connector type for your Genesis G70 in the owner’s manual or with a reputable parts retailer. If unsure, a Genesis dealer can confirm the right fit.
Summary
Raising the wipers on a Genesis G70 is a straightforward operation that facilitates cleaning and blade replacement. Park the car, turn off the ignition, lift the arm gently, perform maintenance, and lower it back with care. For blade replacements, confirm compatibility and follow the connector’s release steps. Regular maintenance helps keep your windshield clear and your wipers functioning smoothly.