The front wiper blades for the 2019 Chevy Traverse are typically 26 inches on the driver’s side and 18 inches on the passenger’s side, with a rear blade about 11 inches. This combination fits most trims of the model year.
In practice, blade sizes can vary due to trim level, windshield curvature, or aftermarket replacements. If you want to be sure, consult your owner's manual, check the existing blades, or use the vehicle identification number (VIN) when ordering replacements.
Front wiper blade sizes
Below are the sizes most commonly used on the 2019 Traverse for the two front blades. Use this as a starting point when shopping for replacements.
- Driver-side front blade: 26 inches
- Passenger-side front blade: 18 inches
Note: If you have hesitation, you can measure the blades or verify with a parts retailer using your VIN.
Rear wiper blade size
The rear wiper blade for most 2019 Traverse models is typically 11 inches. Some trims may use a different size; always confirm before purchasing a replacement blade.
How to verify and replace
To ensure you buy the right blades, you can confirm by one of the following methods:
- Check the owner's manual's maintenance/wiper section for blade lengths.
- Remove one of the old blades and measure its length end-to-end.
- Consult a reputable auto parts retailer with your vehicle’s year, make, model, and VIN.
When replacing, follow the blade installation instructions included with the replacement blades or consult a professional if you’re unsure.
Summary
For a 2019 Chevy Traverse, plan for 26-inch driver-side and 18-inch passenger-front blades, plus an 11-inch rear blade. Verify with manuals or a parts professional if your configuration differs, and you’ll stay prepared for rainy drives.