What bulbs does a 2008 Honda Accord take?

Low-beam headlights typically use H11 bulbs, high-beam headlights use 9005 bulbs, and fog lights (if your model has them) use H3. These are common configurations, but exact bulb types can vary by trim and market.

The 2008 Honda Accord line spanned several trims and regions, and some models may have different headlamp or fog-light setups. Below is a practical guide to the usual configurations and how to verify the correct bulb for your specific car.

Headlights and exterior bulbs

The following list covers typical bulbs found on many 2008 Accords in North America. Use this as a starting point and confirm with your manual or parts catalog if you’re in doubt.

• Low-beam headlights: H11


• High-beam headlights: 9005


• Fog lights (if equipped): H3


• Front turn signals: 3157 (amber)


• Rear turn signals: 3157 (amber)


• Parking lights (front and rear as applicable): 194 or 168


• Tail/brake lights: 7443 (dual-filament in many models; some markets use 7440)

Notes: Some trims or regional versions may swap certain bulbs (for example, fog lights or front signal bulbs). If you’re unsure, remove the bulb or check the owner’s manual or Honda’s parts catalog for your exact VIN.

How to confirm the exact bulb for your car

To ensure you purchase the correct bulb the first time, follow these steps:

1. Open the hood and locate the bulb housing for the light you want to replace (headlight, fog light, turn signal, etc.).


2. Remove the bulb and read any stamping on the base or on the bulb itself (this often shows the exact part number).


3. Refer to the owner’s manual or the official Honda parts catalog for your specific trim and market to confirm the exact bulb type.


4. If in doubt, consult a parts counter with your vehicle’s VIN to get the correct bulb match.


5. Choose high-quality OEM-equivalent bulbs when possible to ensure proper fit and performance.

By verifying the exact bulb type for your trim and region, you’ll avoid mismatches and ensure optimal illumination and safety on the road.

Model/market variations and tips

Bulb configurations can vary between the U.S., Canada, and other markets, as well as between LX/EX/EX-L trims. In some European or other regional versions, low-beam configurations may differ (for example, alternative bulb types or lamp assemblies). Always cross-check with your vehicle’s documentation or a trusted parts source before buying replacements.

Summary

For a typical 2008 Honda Accord, expect low beams to be H11, high beams to be 9005, and fog lights (if equipped) to be H3. Turn signals and parking lights use common automotive bulbs such as 3157, 194, or 168, while tail/brake lights frequently use 7443. Because trims and markets vary, verify the exact bulb type for your car in the owner's manual or via Honda’s parts catalog using your VIN. This ensures accurate replacements and maintains optimal visibility.

Do I need H11 or 9005?

H11 bulbs are designed for use as low beam headlights, while 9005 bulbs are typically used for high beams. This results in a higher brightness level for the 9005 bulbs compared to the H11 bulbs.

What headlight bulbs does a 2008 Honda Accord take?

2008 Honda Accord Headlight Bulb

• Sylvania Basic Bulb H11. Customize.
• Sylvania Basic Headlight and Fog Light Bulb 9005. Customize.
• Sylvania Basic Bulb H7.
• Sylvania SilverStar Bulb H11ST-2.
• Sylvania Basic Headlight Bulb 9006.
• Sylvania XtraVision Headlight Bulb H11XV-2.
• Sylvania Basic Bulb H11.
• Sylvania XtraVision Bulb H11XV.

Are H11 and 9005 the same bulb?

Difference between these bulbs will be the O-ring on the base. H11 on the left side will have a big pronounced O-ring on the base of the bulb versus the 9005.

What kind of bulbs do Honda Accords use?

Honda Accord (2016) Bulb Size Chart