Most modern Toyota Camry models use a 26-inch driver-side blade and an 18-inch passenger-side blade. However, sizes can vary by generation, trim, and market, so it’s important to verify for your specific car.
Common blade sizes for recent Camry models
For many Camrys built over the last decade, the standard pairing you’ll buy off the shelf is 26 inches on the driver’s side and 18 inches on the passenger’s side. Always confirm for your exact year and trim.
- 26-inch driver-side blade
- 18-inch passenger-side blade
Variations exist, especially on older generations or in different markets. When in doubt, check the owner’s manual or the blade packaging.
How to confirm the exact size for your car
To ensure accuracy, use one of these methods. The steps below are the quickest ways to verify the correct blade size for your Camry.
- Check the owner’s manual or the label inside the driver’s door jamb, which often lists the recommended blade size or provides the part numbers for replacement blades.
- Inspect the current blades: some blades have the length printed on the blade or packaging. If not, remove one blade and measure its length from the blade tip to the center of the mounting point.
- Use a trusted parts retailer’s lookup tool by year, make, model, and trim. Retailers commonly show the exact blade size and offer compatible options.
- If you’re unsure, bring the car to a shop or fetch the exact year and trim information, and ask a parts associate to confirm the correct size. The driver’s-side blade is almost always 26 inches for recent Camrys, with the passenger side typically 18 inches, but there are exceptions.
By verifying with an official source or professional retailer, you reduce the chance of ordering the wrong size and ensure optimal visibility in all weather.
Variations by generation
While the 26-inch driver-side and 18-inch passenger-side setup is common for many late-model Camrys, some generations and trims use different sizes. It’s especially important to verify if you own an older Camry or a hybrid, as the blade lengths can differ.
Examples of alternative sizes you might encounter
- Modern Camrys (many 2010s to present): 26" driver / 18" passenger
- Some older or regional models: 24" driver / 19" passenger
- Other combinations you might see: 26" / 17" or 24" / 18"
In any case, the fastest path to accuracy is using the year-by-year lookup or checking the existing blades.
Summary
For most recent Toyota Camry models, replacing with a 26-inch driver-side blade and an 18-inch passenger-side blade is correct. Always verify using the owner’s manual, the vehicle’s door jamb sticker, or a trusted retailer’s lookup tool, because some generations or trims may require different sizes.
What is the size wiper blade for a Camry?
Your vehicle requires a 28-inch blade on the driver's side, a 24- to 26-inch blade on the passenger side, depending on the model year, and a 12-inch blade on the rear window. AutoZone is here to help you pick the perfect blades for your specific model year and requirements so you can drive safely.
What size wipers for a 2018 Toyota Camry?
2018 Toyota Camry windshield wipers come in two different sizes. The driver's side windshield wiper is 26 inches long, while the passenger's side wiper is 20 inches long.
Can I use a 28 wiper instead of 26?
Don't. The potential for poor performance and even damage just isn't worth the hypothetical extra inch of visibility. Sticking with the manufacturer's recommended size is the only way to guarantee a clean, streak-free wipe and a long life for your wiper system.
What size wipers for a 2020 Toyota Camry?
2020 Toyota Camry Windshield Wiper Blades - 26" Driver Side 20" Passenger Side.