For most modern Honda CR-Vs, the front wipers are 26 inches on the driver’s side and 17 inches on the passenger side, with an 11-inch rear wiper where equipped. Exact sizes can vary by year and market, so it’s essential to confirm the correct measurements for your specific vehicle before buying replacements.
How to confirm the exact sizes for your CR-V
To ensure you purchase the right blades, use these steps to verify your vehicle’s exact wiper sizes.
- Check your owner's manual, which usually lists the recommended blade lengths for front and rear wipers by model year.
- Inspect your current blades for a size imprint or label that shows the blade length (often stamped on the blade spine).
- Use Honda's official parts catalog or a trusted retailer’s search tool by entering your year, model, and trim to pull the exact blade sizes.
- If you’re replacing both front blades, note whether your CR-V uses a paired set (26" driver / 17" passenger) or requires individual lengths.
By following these steps, you can confidently select the correct wiper blades for your specific CR-V model.
Typical wiper sizes for recent CR-V models
Below are the sizes most commonly used on recent-generation CR-Vs. Always verify for your exact year and trim, since there can be regional variations.
Front wipers
For current-generation CR-Vs, the standard front blade setup is usually:
- Driver-side blade: 26 inches
- Passenger-side blade: 17 inches
Note: Some older or non-U.S. markets may use slightly different lengths. If in doubt, check the blade labels or the official parts catalog for your specific year.
Rear wiper
The rear wiper blade, when equipped, is typically around 11 inches for most modern CR-Vs, though certain years or trims may vary. Always confirm the exact rear blade length before purchase.
- Rear wiper blade: about 11 inches (verify for your model)
Rechecking these measurements ensures you buy a correct rear blade in addition to the front pair.
Why sizes vary and how to replace confidently
Wiper blade sizes change across CR-V generations and may differ by market. Factory specifications can shift with redesigned dashboards, hatch configurations, or regional parts. When shopping, prioritize the exact year, trim, and market you’re in, and use the blade labels or a reputable parts lookup to confirm.
Summary
In brief: the standard setup for many recent Honda CR-Vs is a 26-inch driver-side front blade and a 17-inch passenger-side front blade, with an 11-inch rear blade where the vehicle has rear wiping. Sizes can vary by generation and region, so always verify via the owner’s manual, current blade labels, or Honda’s official parts catalog before making a purchase. This quick check helps ensure optimal visibility and reliable performance from your wiper blades.