The typical front wiper blades for a 2020 Dodge Challenger are 24 inches on the driver’s side and 20 inches on the passenger side.
Understanding the standard front blade sizes
For the 2020 Challenger, the front wipers are generally a two-blade setup designed to efficiently sweep the large curved windshield. Note that the Challenger’s rear window does not commonly include a rear wiper, so the replacement discussion focuses on the front.
Two-blade setup and its significance
The Challenger traditionally uses one longer blade on the driver’s side and a shorter blade on the passenger side, which helps maintain full visibility across the windshield while accommodating the car’s styling and roofline.
The following list shows the typical sizes used for the front wipers on the 2020 Challenger:
- Driver's side blade: 24 inches
- Passenger-side blade: 20 inches
When replacing, always match these dimensions unless you’re selecting a specialized aftermarket or all-weather upgrade, which often preserves the same two-front-blade lengths.
How to confirm the correct size for your specific Challenger
To ensure you purchase the exact blades for your vehicle, use a quick verification process. The steps below help you confirm the sizes before you buy.
- Check the length stamped on each existing blade or the attachment label.
- Consult your vehicle’s owner manual or the window sticker for wiper blade specs.
- Enter the year, make, model, and trim (or VIN) on an auto parts retailer’s site to pull the precise fit.
- Bring the current blades to a store to compare lengths side-by-side if you’re unsure.
Once confirmed, you can choose either OEM blades or reputable aftermarket options in the same sizes to maintain proper visibility and fit.
Tips for choosing replacement blades
Consider climate and blade design. Beam blades often provide better contact on the Challenger’s curved windshield, and weather-rated blades can improve performance in rain or snow. Replacing both front blades at the same time helps ensure even performance and reduces streaking.
- Stick with 24" driver-side and 20" passenger-side blades for the 2020 Challenger front windscreen.
- Choose a weather-rated blade if you drive in heavy rain or snow.
- Ensure the blade attachment type matches your wiper arms (friction-fit vs. pin/type adapters).
By confirming sizes and selecting quality blades, you’ll maintain optimal visibility in a variety of driving conditions.
Summary
For the 2020 Dodge Challenger, the standard front wiper blade sizes are typically 24 inches on the driver’s side and 20 inches on the passenger side. Always verify with the owner’s manual or a parts retailer to account for any trim-specific differences, and replace both blades together for best performance and even wear.
What size windshield wipers does a 2020 Dodge Challenger take?
22"
Note: 22" Driver side wiper. 22" Passenger side wiper.
Can I use 24 instead of 22 wiper blades?
Size matters to a point, just as long as you are about 1 inch higher or lower than your current wiper blade size. If you buy wiper blades that are too big, they might overlap or touch which will cause them to break.
What size wiper blades for a challenger?
22"
2020 Dodge Challenger Windshield Wiper Blades - 22" Driver Side 22" Passenger Side. 2020 Dodge Challenger Windshield Wiper Blades - 22" Driver Side 22" Passenger Side - Silicone Plus is backordered and will ship as soon as it is back in stock. BOGO Purchase!
What size wiper blades for a 2020 Dodge Charger?
Front Windshield Wiper Blades For Dodge CHARGER 2012-2020 Pair 24" 21"All season.