Most Dodge Dakota pickups use a 20-inch blade on the driver's side and a 17-inch blade on the passenger side. However, wiper sizes vary by year and trim, so always confirm with your vehicle's manual or by measuring the current blades. This guide explains how to determine the exact sizes for your Dakota and where to look if you’re unsure.
How to determine the exact wiper sizes for your Dakota
To ensure you buy the correct blades, follow these steps to verify the exact lengths for your specific truck.
- Check the current blades. If you can access the wipers, look for the length marking on the blade itself or measure the blade from the base to the tip with a ruler or tape measure. The driver’s side blade is usually longer than the passenger’s side.
- Consult the owner’s manual or the door jamb placard. The manual or a small sticker on the driver’s door frame often lists the recommended blade sizes by position.
- If you don’t have the manual, use a parts retailer’s fitment tool. Enter the Dakota’s year, make, and model (and cabin configuration if needed) to display the correct blade lengths.
- When in doubt, bring the old blades to a parts store. An associate can confirm the lengths and help you choose compatible blade types (standard frame, beam, or hybrid).
- Consider your climate and use case. If you drive in snow or very cold conditions, you might prefer a winter-grade blade with a reinforced frame or silicone blade for better longevity.
Accurate sizing can depend on factors like cab style (regular, extended, or club cab) and whether your Dakota uses a two-blade or single-blade approach for the wiper arms. If you’re unsure about your exact configuration, the steps above are the quickest way to confirm.
Common sizes you’ll encounter on Dodge Dakota models
In practice, the most widely used combination across many Dakota years is a driver’s blade of 20 inches and a passenger blade of 17 inches. Some older or non-standard configurations may vary, so it’s best to verify for your specific year.
- Driver’s side: 20 inches
- Passenger side: 17 inches
For older Dakotas or unusual cab setups, you might encounter alternative lengths, but the 20/17 pairing remains the default starting point for most models. Always confirm with a measurement or fitment lookup if you’re purchasing blades.
Summary
The typical wiper blade sizes for a Dodge Dakota are 20 inches on the driver’s side and 17 inches on the passenger side. Sizes can vary by year, cab configuration, and trim, so verify by checking the current blades, consulting the owner’s manual or a reputable fitment tool, or asking a parts professional. By confirming the exact lengths before purchase, you’ll ensure optimal performance in rain, snow, and other conditions.