The front wipers are typically 24 inches on the driver’s side and 19 inches on the passenger side, with a 12-inch rear blade. These sizes cover most 2017–present Chrysler Pacifica models, including the Pacifica Hybrid, but some years or trims may vary. Always verify against your vehicle’s manual or the packaging on replacement blades.
Front windshield wipers: size and fit
The front blades on most Pacifica models are designed as a two-piece setup, with different lengths for the driver and passenger sides. The measurements below reflect the standard configuration used on many 2017–present Pacifica vehicles.
- Driver side: 24 inches
- Passenger side: 19 inches
These front blade sizes fit the majority of 2017–present Pacifica models, including the hybrid variant. If your vehicle lists different sizes, verify with the owner’s manual or the OEM parts catalog before purchasing replacements.
Variations to watch for
Some trims, regional specifications, or older production years may use slightly different front blade lengths (for example a 23" or 21" pairing). Always confirm the exact size for your specific vehicle before buying replacements.
Rear windshield wiper: size and fit
The rear wiper on most Pacifica models uses a single blade, and the typical length is 12 inches. This size fits the rear window on the majority of 2017–present Pacifica vehicles.
- Rear: 12 inches
As with the front blades, there can be regional or year-to-year variations for some Pacifica configurations. If you notice a different blade length, check the owner’s manual or the current blade packaging to confirm.
Check for model year differences
While 12 inches is standard, certain markets or early production runs may use a slightly different rear blade size. When in doubt, verify with the vehicle’s VIN-specific parts diagram or consult a dealership parts counter.
How to confirm the exact size for your Pacifica
To ensure you purchase the correct blades for your exact vehicle, use these verification methods.
- Inspect the current blades and measure their length with a ruler or tape measure.
- Consult the owner’s manual, which lists recommended blade sizes by position.
- Check the packaging on your current blades for size specifications or part numbers.
- Use the vehicle’s VIN to look up the correct blade sizes in the official Mopar/Parts catalog or a reputable retailer’s site.
After confirming the sizes, you’ll avoid mismatched blades and ensure optimal wiper performance in all weather.
Summary
In most Chrysler Pacifica models built since 2017, plan for front blades of 24 inches (driver) and 19 inches (passenger) with a 12-inch rear blade. Because exact sizes can vary by year, trim, or region, always verify using the owner’s manual, current blade packaging, or a VIN-based parts lookup before purchasing replacements.