Typically, the Hyundai Tucson uses a 26-inch blade on the driver's side and an 18-inch blade on the passenger side. Exact sizes can vary by model year and market, so verify with your owner's manual, inspect the blades for size markings, or use Hyundai's official parts finder to confirm the correct fit.
Understanding windshield wiper sizes for the Hyundai Tucson
Several factors determine the blade lengths for a given Tucson, including model year, generation, and regional market. While 26 inches on the driver side and 18 inches on the passenger side is the most common configuration, some years and trims may use slightly different lengths. Always confirm before purchasing replacements.
Typical configurations you may encounter
Below are the commonly seen blade lengths for the Tucson across many model years. Sizes refer to the length of the blade itself, not the wiper arm.
- Driver-side blade: 26 inches
- Passenger-side blade: 18 inches
Note that some markets or specific model years may use different passenger lengths (for example 17–19 inches) or, less commonly, a non-standard driver length. Always verify with a trusted source for your exact year and region.
How to verify and measure the right size
If you are unsure of your Tucson's specific blade lengths, use these steps to confirm quickly and accurately.
- Check the owner's manual or the door jamb sticker for recommended blade lengths.
- Look at the current blades for markings that indicate length (often molded into the blade or printed on the packaging).
- Measure the blades from end to end with a flexible tape measure to confirm the length (do both driver and passenger sides).
- Use an official Hyundai parts finder or a trusted auto parts retailer. Enter your car's year, trim, and VIN if prompted to get exact compatible sizes.
- If you are replacing in-store, ask the associate to verify fitment or test preliminary blades to ensure proper coverage and no interference.
Measuring and cross-checking with a reliable source will help avoid confusion when purchasing replacements, particularly if your Tucson has an unusual trim or aftermarket modifications.
OEM vs aftermarket blades
OEM blades are built to the factory specification for your Tucson and often guarantee precise fit and performance. Aftermarket blades can also offer good fit and savings; just ensure you choose the correct size and compatibility with your wiper arm type (hooked, bayonet, or pin) and the weather conditions you face.
Summary
In most Hyundai Tucson models, you will typically find a 26-inch driver-side blade paired with an 18-inch passenger-side blade. Because sizes can vary by year and market, always confirm using the owner's manual, current blade markings, or a trusted parts catalog before purchasing replacements. Measuring the blades or using a parts finder helps ensure you get the correct fit and optimal visibility in all weather conditions.