The typical front wiper blades for a 2014 Dodge Journey are 24 inches on the driver’s side and 20 inches on the passenger side, with an 11-inch rear blade. This article breaks down those sizes, how to verify them on your specific vehicle, and tips for replacement.
Wiper blade specifications can vary by trim, production run, or aftermarket changes. To be certain, check the blade packaging, your owner’s manual, or use a parts retailer’s size lookup by VIN or model year.
Front wiper blade sizes
The Journey sold in 2014 commonly uses a two-blade setup across the front. The standard lengths are:
- Driver-side blade: 24 inches
- Passenger-side blade: 20 inches
Conclusion: These sizes fit most 2014 Journeys; if your vehicle has different blades, confirm with a parts lookup or measure the current blades.
Rear wiper blade size
The 2014 Dodge Journey uses a single rear blade, typically measuring:
- 11 inches
Conclusion: 11 inches is the standard rear blade size; aftermarket options may list 12 inches in some packaging, but confirm fit before buying.
How to confirm the exact size for your vehicle
Use these steps to ensure you order the correct blades for your exact car:
- Check the sticker on the current wiper blades for size markings
- Consult the owner’s manual or vehicle documentation
- Enter your VIN or model year into a reputable parts retailer’s lookup tool
Conclusion: Verifying with a reliable source helps avoid ordering wrong sizes, especially if you have a variant or aftermarket blades installed previously.
Tips for replacing wipers
When replacing, ensure the blade type matches your arm connector (hook, pin, or bayonet), and consider all-weather or winter-rated blades for year-round use.
Summary
For a 2014 Dodge Journey, plan for 24" driver-side, 20" passenger-side front blades, and an 11" rear blade. Always verify with the packaging, owner’s manual, or a VIN-based lookup to ensure the best fit for your specific vehicle.