The standard front wiper sizes for the 2015 Nissan Altima are 26 inches on the driver’s side and 17 inches on the passenger side. The sedan typically does not have a rear wiper.
Standard front wiper sizes for the 2015 Altima
The 2015 Altima uses a two-blade front setup. The commonly recommended blade lengths for this model are:
- Driver’s side: 26 inches
- Passenger’s side: 17 inches
When shopping for replacements, these lengths are the most commonly matched to the stock arms. If your vehicle has a trim or aftermarket modification that differs, double-check the exact blade length before purchasing.
Rear wiper status on the 2015 Altima
Most 2015 Altima sedans do not come with a rear windshield wiper. If your specific car does have a rear wiper installed, the size is typically around 11 inches, but you should confirm with the owner’s manual or by measuring the existing blade.
- Rear wiper (if installed): ~11 inches
In practice, the majority of buyers of this model will replace only the front blades, unless a rear wiper is present as part of a dealer-installed option or aftermarket modification.
How to verify the right size and fit
To ensure you get the correct blades, follow these steps before purchasing replacements:
- Check the owner’s manual or the sticker on the driver’s door jamb for blade size recommendations.
- Remove a blade and measure its length from tip to tip, or measure the available mounting area to confirm the length you need.
- When shopping, specify the year, make, model, and trim, and verify that you’re getting the 26-inch driver’s side and 17-inch passenger’s side front blades.
- Consider choosing a matched high-quality brand for consistent performance and wear.
This helps ensure you get a proper fit and optimum wipe quality across weather conditions.
Summary
For a 2015 Nissan Altima sedan, the recommended front wiper blades are 26 inches on the driver’s side and 17 inches on the passenger side. The vehicle typically does not have a rear wiper; if yours does, the rear blade is commonly around 11 inches. Always verify with the owner’s manual or by measuring the existing blades, and opt for OEM or reputable aftermarket brands for best results.