The 2010 Honda Accord uses different tire sizes depending on the trim and wheel package. The most common factory sizes are 205/65R16 on base models with 16-inch wheels and 235/45R17 on higher trims with 17-inch wheels; some higher-end trims with larger wheels use around 18-inch sizes. Always verify the exact size on your car’s door placard.
Common factory sizes by wheel diameter
Below is a quick reference of typical stock tire sizes for the 2010 Accord, organized by wheel size. Your exact configuration may vary if aftermarket wheels are installed or if a different trim package was chosen.
- 16-inch wheels (base LX, LX-P, and some SE 4-cylinder models): P205/65R16
- 17-inch wheels (EX, EX-L, and some V6/upper trims): P235/45R17
- 18-inch wheels (select higher-end trims and some coupes): commonly around P235/40R18 (size varies by trim; verify the exact spec)
For absolute accuracy, check the driver’s door jamb tire placard or the owner's manual to confirm the exact size assigned to your vehicle.
How to identify your exact tire size on a 2010 Accord
To confirm the correct size for your particular car, use these sources: the driver’s door placard, the owner’s manual, and the tire sidewall itself. The placard lists the recommended tire size, load index, and speed rating for the factory setup. The tire sidewall shows a string like P205/65R16 92T, which confirms the size; match or exceed the listed load index and speed rating when replacing tires.
What to consider when replacing tires
When choosing replacement tires, you may stay with the same size or select an alternative size that fits your wheels and preserves clearance. If you choose a different size, pay attention to width, aspect ratio, overall diameter, speed rating, load index, and potential effects on speedometer accuracy and vehicle systems. When in doubt, consult a tire professional or Honda dealer.
Where to find official specs and installation help
Definitive, vehicle-specific sizing comes from the door placard, the owner's manual, or Honda’s official support resources. Some online VIN-based guides can help, but always cross-check against your car’s placard to be sure.
Summary
For a 2010 Honda Accord, factory tire sizes typically range from 205/65R16 on 16-inch wheels to 235/45R17 on 17-inch wheels, with 18-inch options available on select trims. Always verify the exact size for your car on the door placard and consult the manual or dealer if you’re unsure.