For a 2019 Equinox, brake pad replacement parts typically cost between $40 and $150 per axle, with installed prices generally ranging from $150 to $350 per axle depending on pad material, brand, and labor rates.
Pricing landscape at a glance
Brake pad prices vary by whether you’re replacing front or rear pads, the material chosen (budget organic, semi-metallic, or ceramic), and whether you buy OEM dealer parts or aftermarket equivalents. Labor is a separate cost and can add significantly to the final bill.
Factors that influence price
Several factors determine the final price you’ll pay at the shop or in a parts order.
- Pad material: Ceramic pads typically cost more than semi-metallic or organic ones but can offer quieter operation and longer life.
- Position: Front brakes generally cost more due to larger rotors and higher braking loads; rear brakes tend to be cheaper.
- Brand and source: OEM dealer parts are usually more expensive than aftermarket brands; premium brands (e.g., Akebono, Bosch, Brembo, Raybestos) fall in between.
- Includes hardware: Some kits include shims, anti-squeal grease, and wear sensors; others charge separately.
- Rotor condition: If rotors are worn or warped and require resurfacing or replacement, labor and parts costs increase.
- Vehicle-specific factors: The 2019 Equinox uses four-wheel disc brakes; pad thickness and caliper design influence replacement complexity.
Note: The real price you pay depends on your location, the shop, and current promotions or online discounts.
Typical price ranges by pad type and axle
Front brake pads
Front pads handle most braking power and wear, so they’re the price anchor for most brake jobs.
- Budget/organic or standard semi-metallic front pads: approximately $40–$70 per axle
- Mid-range or premium semi-metallic/ceramic front pads: approximately $70–$120 per axle
- GM OEM front pads (dealer parts): approximately $80–$150 per axle
Prices reflect single-axle kits (two pads on the front wheels) and exclude labor or rotor replacement.
Rear brake pads
Rear pads are typically cheaper due to smaller rotors and different wear patterns.
- Budget rear pads (organic/standard): approximately $20–$40 per axle
- Mid-range rear pads (semi-metallic/ceramic): approximately $50–$90 per axle
- GM OEM rear pads (dealer parts): approximately $60–$100 per axle
As with front pads, these figures cover pad kits only and do not include labor or rotor work.
Where to buy and what to expect for installation
Common sources for brake pads include brick-and-mortar auto parts stores, online retailers, and dealership service departments. Prices can vary, and some shops offer package deals for replacing both front or both rear pads in a single service.
- Auto parts chains (Advance Auto Parts, AutoZone, O'Reilly): typical range $40–$120 per axle for front pads; $20–$90 for rear pads depending on brand
- Online retailers (RockAuto, Amazon, manufacturer sites): often competitive; verify compatibility and shipping costs
- GM dealership service departments: higher price range, typically $60–$150 per axle for pads alone, plus labor
Compare quotes and confirm whether the estimate includes hardware, sensors, or rotor resurfacing. If unsure, ask for a breakdown of parts and labor.
Labor considerations and complete brake jobs
Labor costs vary by region and shop, and the total can change if rotors are resurfaced or replaced alongside pads.
- Independent repair shops: roughly $100–$180 per axle for pad replacement alone
- Dealership service departments: roughly $150–$350 per axle for pad replacement plus labor
Many shops offer a discounted per-axle rate when replacing both front or both rear pads at the same time. If rotors require resurfacing or replacement, plan for higher total costs.
Summary
For a 2019 Chevrolet Equinox, expect parts-only brake pad prices to run from about $40–$150 per axle (front being higher on average), with installed costs typically between $150 and $350 per axle depending on pad material, brand, and labor. Shop around, confirm rotor needs, and consider OEM versus aftermarket options to balance cost, performance, and warranty.