The rear wiper blade for the 2019 Honda Fit is 12 inches long (about 30 cm).
In practice, this size covers the vast majority of 2019 Fit models sold in the United States and many other markets. Regional variations can exist, so it’s wise to verify the exact length and mounting style for your car by checking the owner’s manual or inspecting the current blade before buying a replacement. Ensuring the right length and attachment will help you maintain effective wipe coverage on the rear window.
Confirming the size for your model
To help you choose the right blade, use these guidelines and checks as you shop or measure your existing setup.
- Most 2019 Honda Fit rear wiper blades are 12 inches in length in the common US and many global markets.
- Check the mounting type on your wiper arm (usually a simple attachment like a J-hook or a side-pin) to ensure compatibility with aftermarket replacements.
- When shopping, search for a 12-inch rear blade specifically labeled for Honda Fit or Jazz models from the same generation, and confirm the mounting style in the product description.
- If you still aren’t sure, bring the old blade or the arm to an auto parts retailer for an in-person match or consult the Honda parts catalog for your VIN.
In uncertain cases, verifying the size and attachment with a parts specialist or the dealership helps avoid buying the wrong blade.
How to replace the rear wiper blade
Replacing the rear blade is a quick DIY task that can be done in minutes with basic tools and the correct blade size. Below are the general steps to guide you through the process.
- Lift the rear wiper arm away from the glass until it stays in a raised position.
- Press the release tab on the blade housing and slide the old blade out of its connector.
- Slide the new 12-inch blade into the connector until you hear a click, indicating it’s securely attached.
- Carefully lower the wiper arm back onto the glass to avoid damaging the blade or window.
- Test the wiper to ensure smooth operation and that there are no streaks; if needed, adjust or trim as required by the blade model.
Most rear wiper blades for the 2019 Honda Fit use a common mounting style, and many replacements offer a universal fit with adapters. Always follow the blade’s installation instructions and confirm compatibility with your specific vehicle model and year.
Where to buy
You can purchase rear wiper blades for the 2019 Honda Fit at Honda dealerships, auto parts retailers, or online stores. Look for a 12-inch rear blade labeled for Honda Fit (or Jazz) models and verify the mounting type before purchasing.
Summary: For the 2019 Honda Fit, the rear wiper blade size is generally 12 inches (30 cm). Confirm the exact length and attachment type for your vehicle by checking the owner’s manual or measuring the current blade, and follow proper replacement steps to ensure a secure fit and clean rear visibility.