The 2015 Jeep Cherokee typically uses M14x1.5 lug nuts with a 60-degree conical seat, five per wheel, and a hex size of 22 mm. The recommended tightening torque is about 100 ft-lbs (136 Nm). Some wheel packages or aftermarket wheels may differ, so always verify with the owner's manual or door jamb placard for your specific vehicle.
Below is a detailed guide to the standard specifications and how to confirm the correct lug nut size for your Cherokee, including installation tips and maintenance considerations.
Key specifications for the Cherokee lug nuts
Before reviewing the specs, note that variations can exist if you have aftermarket wheels or different trim packages. The factory configuration for most 2015 Cherokee models includes the following:
- Lug nut thread size and type: M14x1.5 with a 60-degree conical seat
- Lug nut hex size: 22 mm (7/8 inch) typically required for removal and installation
- Number per wheel: five lug nuts per wheel
- Recommended lug nut torque: 136 Nm (100 ft-lbs)
Note: If your vehicle has aftermarket wheels or a special package, the lug nut size and seat type can differ. Always verify against the vehicle documentation or the wheel manufacturer before mounting new wheels.
Maintenance tips and verification
To ensure safe and proper wheel mounting, follow these guidelines when identifying or replacing lug nuts:
- Use a torque wrench to tighten in a star pattern to the specified torque and avoid overtightening
- Inspect lug nuts and studs for wear, corrosion, or damage before reinstalling wheels
- Ensure you are using the correct seat type for your wheels (conical 60-degree for factory rims; aftermarket wheels may require different seats)
Following these steps helps maintain wheel integrity, ensure proper seating of the lug nuts, and promote safe driving conditions.
Summary
The 2015 Jeep Cherokee generally uses M14x1.5 lug nuts with a 60-degree conical seat, five per wheel, and a torque specification around 100 ft-lbs (136 Nm). The hex size is typically 22 mm. Always confirm with your specific vehicle configuration, especially if you have aftermarket wheels or a non-standard trim package.
What size lug nuts are on a 2015 Jeep Cherokee?
Dorman – Wheel Lug Nut: M14-1.50 Thread, Conical 60, Duplex Acorn, 1.87" Length, Chrome (sold by each) (Part No. 611-187)
What size lug nut is on a Jeep Cherokee?
| Item Specifics | |
|---|---|
| Thread Pitch : | 12mm x 1.5 or 12x1.5 or M12x1.5 |
| Manufacturer Warranty : | Lifetime |
| Hex Size : | 19mm |
| Interchange Part Number : | 12x1.5 Lug Nuts |
Are all lug nuts 21mm?
The three most common hex sizes for lug nuts are 17 mm, 19 mm, and 21 mm, while 22 mm, 23 mm, 11⁄16 inch (17.5 mm), and 13⁄16 inch (20.6 mm) are less commonly used.
Is 7/8 socket the same as 22mm?
A: 22mm = 0.866", which essentialy is a 7/8" socket. A 7/8" socket will work on a 22mm lug nut, but it can feel a little loose. The other way around, a 22mm can work on a 7/8" lug nut, but it can be really snug, which is not bad.