The wheel studs on a Honda S2000 are M12 x 1.5, meaning 12 millimeters in diameter with a 1.5 millimeter thread pitch.
The S2000 uses a 5x114.3 mm bolt pattern, so any wheels or adapters must match 5 lugs on a 114.3 mm circle. When sourcing replacements, ensure the hardware matches the M12x1.5 thread and the wheel seat type used by stock lug nuts.
Key specifications
Below are the essential specs you should know about the S2000 wheel studs when inspecting wheels or sourcing replacements.
- Stud diameter and thread: M12 x 1.5 (12 mm diameter with 1.5 mm thread pitch).
- Bolt pattern: 5 x 114.3 mm (5-lug pattern on a 114.3 mm circle).
These basics cover the stock wheel studs and the wheel compatibility for standard wheels; always verify your exact model year and wheel configuration if you are replacing hardware or using aftermarket components.
Replacement considerations
When replacing studs or wheels, confirm the exact stud length and seating type for your wheels, and use lug nuts that match the M12x1.5 thread and seat. Consult the vehicle’s service data or a trusted parts supplier if you’re unsure about any specification.
Summary
The Honda S2000 uses M12x1.5 wheel studs with a 5x114.3 mm bolt pattern. This pairing is the core specification to match for replacements and compatible wheels.