Two fuse boxes exist in the 2013 Malibu: one under the hood in the engine compartment and one inside the cabin on the driver's side of the dash.
In this article, we outline where to find each fuse box, how to access them, and what they typically cover. Always refer to the owner's manual or the diagram on the fuse covers for exact fuse assignments.
Fuse box locations and access
These are the two main fuse blocks and how to reach them.
Engine compartment fuse block (under the hood)
Location: In the engine bay on the driver's side, near the firewall, beneath a black plastic cover labeled FUSES.
Access: Open the hood, locate the fuse block cover, lift it to reveal the fuses and the diagram on the inside. Use the diagram to identify the individual fuses.
Interior fuse block (cabin)
Location: On the driver's side of the dash, behind a small access panel at the left end of the instrument panel (near the steering column).
Access: Remove or swing open the panel to view the fuse block and the accompanying diagram.
The two fuse blocks cover different systems. The engine compartment block handles powertrain and related high-demand circuits, while the interior block controls accessories and passenger-compartment features.
Under-hood fuse block
The under-hood block is the primary source for engine and electrical systems connected to the powertrain. Always ensure the engine is off and the battery is disconnected if you’re replacing a fuse and the replacement fuse matches the amperage rating shown on the diagram.
Interior fuse block
The interior block is where you'll find fuses for the radio, climate controls, instrument cluster, lighting, power windows/locks, and other cabin electronics. Use the fuse diagram on the panel lid to locate the exact fuse and amperage.
Summary
In a 2013 Chevy Malibu, the fuse boxes are located under the hood in the engine compartment on the driver’s side and inside the cabin on the driver’s side dash. Access each panel by removing its cover and consulting the accompanying fuse diagram for correct amperage ratings and fuse locations. If a fuse keeps blowing after replacement, consult a professional to check for shorts or parasitic draws.