Depending on the model year and generation, the outer CV axle nut size on a Chevy Impala is not universal. In practice, you’ll typically encounter sockets in the 30mm, 32mm, or 36mm range, and you should verify the exact size for your specific vehicle.
Why the nut size changes across generations
Chevrolet’s front‑wheel‑drive Impalas span multiple generations and platforms. Each redesign often updates the hub and axle assembly, which can change the outer CV axle nut diameter and the associated torque spec. Because of these variations, the only reliable way to know the correct size is to check your year/model’s service information or physically test the nut with a socket that fits snugly.
Common sizes you may encounter
The CV axle nut sizes you’re most likely to see on Impalas are 30mm, 32mm, and 36mm. In rare cases, you might encounter a 34mm size depending on the exact axle/hub configuration for certain trims or service packages.
- 30 mm
- 32 mm
- 36 mm
If none of these fit, or if the nut is damaged, consult the official GM service information for your exact year and trim, or have a qualified technician confirm the correct size to avoid stripping or improper reassembly.
How to confirm the exact size for your specific Chevy Impala
Use these steps to identify the proper CV axle nut size for your vehicle before you attempt removal or replacement.
- Check the owner's manual or GM service information for your exact year and trim to locate the specified nut size and torque.
- With the wheel removed, try fitting sockets in increasing size until you find the one that fits snugly on the nut without binding or slipping.
- If you’re unsure, measure the flats of the nut with a caliper or take the vehicle to a shop where they can confirm the correct size and torque specification.
Confirming the exact size before you apply force helps prevent stripping the nut and ensures the axle is reassembled correctly.
Notes by generation
Generational changes — from the early W‑body designs through later Epsilon platforms — can alter hub and axle configurations. Always cross‑check with GM’s official service information for your year/model to confirm the correct size and installation torque.
Torque and installation considerations
Regardless of the exact socket size, the axle nut must be torqued to the specification listed for your year and trim. Use a torque wrench, follow the service manual’s procedure, and replace a damaged nut with a new OEM unit. If the nut or threads are damaged, do not reuse the old nut; install the correct size with the proper torque to ensure safe operation.
Summary
There isn’t a single universal CV axle nut size for all Chevy Impala models. The correct size depends on the year and generation, with common possibilities including 30 mm, 32 mm, and 36 mm. Always verify using the vehicle’s official service information, inspect the nut directly, or consult a professional to ensure you use the correct size and torque for your specific Impala.
What size is the cv axle nut on a 2012 Chevy Impala?
Axle Nut Socket Size: 33mm. Axle Nut Thread Size: M27x2. CV axles serve as the final link between the engine and the wheels, transferring power from the vehicle's transmission and differential to the wheels to drive the vehicle forward.
Ask More
What size is the axle nut on a 2017 Chevy Impala?
Axle Nut Length: 21.5mm. Axle Nut Socket Size: 32mm. Axle Nut Thread Size: M24x1.
Ask More
What size socket do I need to remove a cv axle?
You'll use this to remove the large axle nut that holds the CV axle to the hub. To make your life. Easier. Use it with an impact wrench to loosen things up quickly.
What size axle nut is on a 2006 Impala?
Using a 19 mm socket we're going to go ahead and remove our lug. Nuts. Go ahead and set those aside remove the wheel. And set that aside using a 34 mm socket let's go ahead and remove our axle nut.