The Honda FourTrax Rubicon ATV uses a 4x110 mm lug pattern on its wheels. If you’re asking about a Rubicon-branded UTV or another Honda platform carrying the Rubicon name, lug patterns can vary by year and model, so refer to the specific owner's manual or consult a dealer for exact specifications.
Understanding lug patterns
A lug pattern (also called bolt circle or PCD) describes how many bolts fasten the wheel and the circle diameter that passes through the centers of the bolt holes. It matters for wheel compatibility and safety when fitting aftermarket wheels or spacers.
Honda Rubicon ATV lug pattern specifics
For the classic Honda FourTrax Rubicon ATV line, the wheels are mounted with a 4-lug pattern on a 110 mm bolt circle. This pattern is common across many Honda ATVs in the Rubicon family, but there can be differences for newer UTV Rubicon editions or different generations. Always verify against your specific model-year documentation before buying wheels or adapters.
How to verify your lug pattern
The steps below help you confirm the correct lug pattern for your Honda Rubicon, especially if you’re shopping for wheels or adapters.
- Inspect the current wheel: count the number of lug nuts and measure the diameter from the center of one lug hole to the center of the opposite lug hole.
- Use a ruler or calipers to measure across the bolt circle (the distance you just measured in millimeters).
- Check the owner’s manual, service manual, or the manufacturer’s spec sheet for the exact bolt pattern.
- Consult a Honda dealer or trusted aftermarket wheel supplier with your model year and vehicle type to confirm compatibility.
By confirming the lug pattern, you ensure any replacement wheels or spacers will seat correctly and maintain proper safety margins.
Wheel upgrades and compatibility considerations
When upgrading wheels or choosing spacers, ensure the following: match the lug count and bolt circle, verify the hub bore compatibility, and confirm the hub-centric fit if you want proper alignment and reduced runout. For Honda Rubicon ATVs, most aftermarket wheels list 4x110 mm bolt pattern; always check the exact spec for your year to avoid misfits.
Summary
The Honda FourTrax Rubicon ATV uses a 4x110 mm lug pattern, a common standard for Honda ATVs. If you’re dealing with a Rubicon UTV or a different Honda platform bearing the Rubicon name, always verify the precise bolt pattern for your year and model. When in doubt, consult the manual or a dealer to avoid wheel-fit issues.