Low beams typically use H11 bulbs and high beams use 9005 bulbs on most 2010 Honda CR‑V models. Fog lights, if equipped, usually use H11 as well.
If your CR‑V has factory HID or LED headlights, or if you’re unsure about trim-specific equipment, sizes may differ. Always verify by checking the existing bulb, the owner’s manual, or the vehicle’s service data before purchasing replacements.
Common bulb sizes for halogen headlights
The following sizes cover the standard halogen headlight configuration found on most 2010 CR‑V models. This list is meant as a quick reference and may not apply if your vehicle has been modified or upgraded.
- Low beam: H11 (55W)
- High beam: 9005 (HB3, 65W)
- Front fog lights (if equipped): H11 (55W)
When replacing bulbs, it’s a good practice to replace in pairs to maintain consistent brightness and color. If you only replace one bulb, the new bulb may look brighter than the old one.
Trim variations, upgrades, and how to verify
HID or LED headlight options
Some 2010 CR‑V models may have factory HID headlights or aftermarket LED upgrades. These systems use entirely different bulb types and ballast configurations (for HID) or LED assemblies, so the H11/9005 guidance does not apply. If your vehicle has HID or LED headlights, refer to the owner’s manual, the headlight ballast label, or a Honda service bulletin to identify the correct bulbs and replacement procedures.
To confirm what your specific vehicle uses, you can:
- Check the headlight bulb you remove and look for bulb size stamped on the base.
- Consult the owner’s manual under the Lighting section.
- Ask a dealership parts counter or an auto parts store with your VIN for an exact match.
If you’re replacing bulbs yourself, ensure the engine is off, the headlights are cool, and you handle bulbs by the base (not the glass) to avoid oils from your skin reducing bulb life.
Summary
For a 2010 Honda CR‑V with halogen headlights, plan for H11 low beams, 9005 high beams, and H11 for optional fog lights. If your CR‑V uses factory HID or LED headlights, sizes and replacement procedures differ significantly, so verify with the manual, VIN-based parts lookup, or a dealer. Always consider replacing both headlights in pairs to maintain uniform brightness and color.