Skip to Content
103 State St East Jordan, MI, 49727
  • MON: Closed
  • TUES: 8:00AM - 6:00PM
  • WED: 8:00AM - 6:00PM
  • THUR: 8:00AM - 6:00PM
  • FRI: 8:00AM - 6:00PM
  • SAT: Closed
  • SUN: Closed
MORE >
  • Yelp
  • Google Business Profile
  • Facebook
7984 North St Central Lake, MI, 49622
  • MON: 8:00AM - 6:00PM
  • TUES: 8:00AM - 6:00PM
  • WED: 8:00AM - 6:00PM
  • THUR: 8:00AM - 6:00PM
  • FRI: Closed
  • SAT: Closed
  • SUN: Closed
MORE >
  • Yelp
  • Google Business Profile
  • Facebook

What size headlight bulb for 2006 Honda Accord?

The 2006 Honda Accord typically uses H11 bulbs for the low-beam headlights and 9005 bulbs for the high-beam headlights. If your car has a non-US version, aftermarket headlights, or a different trim, sizes may vary, so always verify with the owner’s manual or the bulb label on your vehicle.


Bulb sizes and compatibility


The following sizes cover the standard headlamp setup on most US-spec 2006 Accords with halogen headlights. If your model differs due to market or upgrades, sizes may vary.



  • Low-beam headlight bulb: H11

  • High-beam headlight bulb: 9005 (HB3)


These two bulbs handle the primary headlight functions on the 2006 Accord in typical configurations. If you have a different market, special edition, or aftermarket lighting, confirm the exact sizes before purchasing.


How to replace headlight bulbs


If you need to swap bulbs, follow these steps to ensure a safe and correct installation. The process is similar across many late-model Hondas.



  1. Park safely, turn off the engine, and open the hood. If your car has non-removable battery access, disconnect the negative terminal as an extra precaution.

  2. Locate the headlight assembly behind the respective lens; access the bulb socket from the engine bay side.

  3. Unplug the electrical connector from the bulb and rotate or release the bulb retainer to remove the old bulb.

  4. Install the new bulb (matching the correct size: H11 for low beam or 9005 for high beam), reconnect the connector, and resecure the housing.

  5. Test the lights before closing the hood, and repeat if you’re replacing both sides.


Tip: Replacing both bulbs on a single side or both sides at once helps maintain consistent brightness and color temperature.


Extra notes and tips


Fog lights and auxiliary lighting may use different bulb types (often H11 or H16 in various markets). If your Accord has aftermarket headlights or HID conversions, the bulb type will differ from the standard halogen sizes listed above. Always verify with the exact part number or by inspecting the old bulb before purchasing replacements.


Summary


For a typical 2006 Honda Accord, the standard headlight bulbs are H11 for the low beams and 9005 for the high beams. Always verify your specific vehicle configuration—especially if you’re in a non-US market or have aftermarket headlights—and consider replacing both bulbs at once to maintain consistent brightness and color. Following proper replacement steps helps ensure a safe and reliable install.

Ryan's Auto Care

Ryan's Auto Care - East Jordan 103 State St East Jordan, MI 49727 231-222-2199
Ryan's Auto Care - Central Lake 7984 North St Central Lake, MI 49622 231-544-9894

Ask any car or truck owner in Central Michigan who they recommend. Chances are they will tell you Ryan's Auto Care.