The typical front wiper blades on Nissan Murano crossovers are 26 inches on the driver’s side and 17 inches on the passenger’s side. Sizes can vary by year, market and trim, so it’s important to verify for your specific vehicle.
Typical blade sizes for recent Murano models
In the last decade, most Murano owners have found front-wiper blades sized at 26 inches on the driver’s side and 17 inches on the passenger’s side. Some older generations or regional markets used slightly different lengths, so always confirm against your car’s paperwork or the blade itself to be sure.
- Driver-side blade: 26 inches
- Passenger-side blade: 17 inches
Note: A handful of older Murano generations and some international variants may use 26"/18" or 26"/19" combinations. If your vehicle falls into one of those categories, your sizes will differ. Always check the owner's manual or a reliable parts diagram for your exact model and VIN.
How to determine the exact size for your Murano
To ensure you purchase the correct replacements, use these verification steps:
- Check the owner's manual or the official Nissan parts diagram for your model year.
- Inspect the current blades for length markings on the blade itself or on the packaging.
- Measure the length of each blade from tip to tip when removed or installed, noting the straight length rather than the curved sweep.
- Use your VIN to pull up the exact parts diagram from Nissan or an authorized parts retailer’s website.
- If in doubt, bring the existing blade to a store; staff can confirm compatibility with your Murano’s year and trim.
Following these steps will help ensure you buy blades that fit and clear your windshield properly.
Summary
For most North American Nissan Murano models in recent years, the standard front-blade size is 26 inches on the driver's side and 17 inches on the passenger's side. However, sizes can vary by year, market, and trim, so always verify using the owner's manual, your VIN, or a trusted Nissan parts diagram before purchasing replacements.