The fog lights on a 2013 Honda CR-V typically use an H11 bulb (12V, 55W).
In this article, we explain the standard bulb size, how to confirm the exact bulb for your vehicle, and practical replacement steps. While H11 is commonly used, some trims or regional versions may differ, so verify before purchasing.
Standard bulb size for 2013 CR-V fog lights
For most US-market 2013 CR-V models with factory fog lamps, the recommended bulb base is H11. This is a single-filament bulb commonly used in fog lamp assemblies.
To verify the exact bulb for your specific vehicle, consider these verification methods:
- Inspect the existing bulb in the fog light housing and read the markings on the base (H11, 9006, etc.).
- Consult the owner's manual under the lighting or bulb replacement section for the exact specification.
- Check the parts diagram or Honda's official service portal for your VIN/trim level.
Using the correct bulb size ensures proper fit and beam pattern and avoids damage to the housing or electrical system.
Replacement guidance
When replacing a fog light bulb, follow these steps to ensure safe and correct installation:
- Park on a level surface and disconnect the negative battery terminal to prevent shocks or shorts.
- Access the fog light housing by removing the bumper cover or reaching through the wheel well, depending on your model.
- Disconnect the wiring harness from the old bulb.
- Remove the old bulb by releasing the retaining clip or turning it counterclockwise and pulling it out.
- Install the new H11 bulb, orienting it correctly in the housing to align with the connector.
- Reconnect the wiring harness, reassemble the bumper area, and test the fog lights before driving.
Note: Always handle halogen bulbs with gloves or a clean cloth to avoid transferring oils to the glass, which can cause failure.
Market/trim variations
While H11 is the standard for many 2013 CR-Vs, some markets or trims may use different bulb bases depending on the fog light assembly installed at factory. If your vehicle was imported or is a non-US model, verify with the dealer or service manual.
- US-market 2013 CR-V with factory fog lights: commonly H11 (55W).
- Certain European or Asian-market trims may use 9006 or other base types; always confirm with the official parts diagram.
When in doubt, consult the owner's manual or the dealer for the exact bulb specification for your VIN and trim level.
Summary
For most 2013 Honda CR-V models, the fog light bulb is H11. Always verify for your specific vehicle configuration, and follow proper replacement procedures to ensure proper fit and safe operation. If you need assistance, a Honda dealer or qualified auto technician can confirm the exact bulb size for your VIN.
How to replace fog lights on a 2013 Honda CRV?
You know it's just a trim piece that's plastic. And it helps to pry from the outside to the inside. It's got little tabs that kind of push. Out.
What size bulb is the fog light on a Honda CRV?
Honda CR-V Bulb, Foglight (H11) (12V 55W) (Valeo)
Ask More
Can I use H11 for fog lights?
H11 LED BULBS | HEADLIGHT AND FOG LIGHT BULB REPLACEMENTS
Upgrading your vehicle to H11 LED Bulbs significantly increases the light output of your headlights or fog lights.
Ask More
Which CRV is the fastest?
When it comes to speed and acceleration, the Honda CR-V stands out as the fastest SUV in Honda's lineup, particularly the Hybrid Sport Touring model. This version achieves a remarkable 0 to 60 mph time of approximately 7.7 seconds, which is impressive among compact SUVs.
Ask More