What size are the wheels on a 2001 Honda Accord 4 lug?

The 2001 Honda Accord uses a 5-lug wheel pattern (114.3 mm bolt circle), not 4-lug. Factory wheels are typically 15 inches in diameter, with 15x6 inches being common. Some trims offered 16-inch alloys. If your car truly has four lugs, it is not the stock configuration and may involve aftermarket wheels or a non-OEM setup; confirm with the door jamb sticker and a trusted technician before driving.

Bolt pattern and hub considerations

Understanding the wheel pattern helps determine compatibility with the Honda hub and brakes. The official specs for this generation and how to verify yours are outlined here.

• Bolt pattern: 5x114.3 mm (5 lugs on a 114.3 mm circle).


• Center bore: about 64.1 mm to fit over the hub.


• Lug nut size: typically M12x1.5, but verify on your vehicle.

Note: If you truly have four lugs, this is not the factory configuration for a 2001 Accord and may indicate aftermarket wheels or a non-OEM setup. Verify by counting lugs and measuring the lug circle, and consult a professional before use.

Common stock wheel sizes by trim

Wheel diameter and width can vary by trim, market, and optional packages. The following reflects typical factory setups for this generation, but always check your vehicle’s sticker or manual for the exact spec.

• Most LX and EX models with the four-cylinder engine used 15x6-inch wheels with 195/65R15 tires as standard.


• Some trims and markets offered 16-inch alloy wheels as an upgrade, with corresponding tire sizes around 205/60R16.

To confirm your exact specification, consult the driver’s door jamb sticker or the owner’s manual for your specific VIN and market.

What to do if you have 4-lug wheels

If your vehicle appears to have four lugs, take these steps to ensure safety and proper fitment.

• Do not attempt to mount 4-lug wheels on a 5-lug hub without proper adapters or rings; this can compromise safety and ABS/braking systems.


• Consult a wheel specialist or Honda-certified shop to verify compatibility and explore options that match the factory 5x114.3 mm pattern.

Conclusion: For a 2001 Accord, the stock configuration is a 5x114.3 mm bolt pattern with typical 15x6 wheels; four-lug configurations are non-standard and require professional verification and appropriate hardware.

Summary

The correct wheel setup for a 2001 Honda Accord is a 5-lug pattern (5x114.3 mm) with standard wheels usually 15x6 inches, and some trims offering 16-inch options. A genuine four-lug configuration is not part of the stock specification and should be checked by a professional to ensure safety and proper fitment. Always verify with the vehicle’s door jamb sticker and owner’s manual.

What Honda has 4x114.3 bolt pattern?

This is a genuine OEM factory rim for Honda Prelude and Accord models from 1994-1996. The 15x6. 5 inch rim is made of aluminum alloy and has a bolt pattern of 4x114. 3 with an offset of 55.

What's the best oil to put in a Honda Accord?

Information

What Hondas have a 4x100 bolt pattern?

Honda Mounting Hardware Specifications

What size rims does a 2001 Honda Accord have?

2001 Honda Accord Coupe Specifications