Skip to Content
103 State St East Jordan, MI, 49727
  • MON: Closed
  • TUES: 8:00AM - 6:00PM
  • WED: 8:00AM - 6:00PM
  • THUR: 8:00AM - 6:00PM
  • FRI: 8:00AM - 6:00PM
  • SAT: Closed
  • SUN: Closed
MORE >
  • Yelp
  • Google Business Profile
  • Facebook
7984 North St Central Lake, MI, 49622
  • MON: 8:00AM - 6:00PM
  • TUES: 8:00AM - 6:00PM
  • WED: 8:00AM - 6:00PM
  • THUR: 8:00AM - 6:00PM
  • FRI: Closed
  • SAT: Closed
  • SUN: Closed
MORE >
  • Yelp
  • Google Business Profile
  • Facebook

What kind of battery does a 2015 Honda Accord key fob take?

The 2015 Honda Accord key fob uses a CR2032 3-volt coin-cell battery.


Battery type and compatibility


This section explains the exact battery size and whether it fits your fob model.



  • Battery type: CR2032, a 3-volt coin-cell battery.

  • Compatibility: Used in the 2015 Accord key fob; other Honda models often use the same size, but check your owner's manual or the battery itself to be sure.

  • Handling and disposal: Dispose of spent batteries according to local regulations; avoid mixing old and new cells in the same device.


These points summarize the essential facts about the battery type and compatibility for the 2015 Accord key fob.


How to replace the battery


This section provides the step-by-step process to swap in a fresh CR2032 and restore fob performance.



  1. Remove the mechanical key by sliding the release and pulling the key blade out of the fob.

  2. Gently pry open the rear cover along the seam with a small coin or flat tool.

  3. Take out the old CR2032, noting which side faces up.

  4. Insert a new CR2032 with the positive (+) side facing up, ensuring it sits flat and makes proper contact.

  5. Snap the rear cover back on and reinsert the mechanical key blade.

  6. Test the fob to confirm that locking/unlocking works from a normal distance.


If the fob remains unreliable after replacement, the issue may lie with programming or the transmitter rather than the battery.


Tips and additional notes


Many dealers and manuals recommend using a reputable brand for the CR2032 to minimize leakage risk and ensure consistent performance. Always recycle used batteries according to local regulations.


Summary: For a 2015 Honda Accord key fob, use a CR2032 3V coin-cell battery. Replacement is straightforward: eject the mechanical key, open the fob, replace the battery with the correct orientation, reassemble, and test. Battery life varies with usage, typically spanning a few years; if issues persist after replacement, seek professional diagnostics.

Can I use a CR2032 instead of a CR2025 in a key fob?


Fit and Functionality:
However, if it's too tight or prevents the case from closing properly, it might be better to stick with the CR2025 to avoid damaging the key fob. In summary, you can use a CR2032 instead of a CR2025 as long as it fits properly in the battery compartment of your car key.



What size battery does a 2015 key fob take?


2005-2010CR1616
2010-2015 (FOB)CR2032
2014-2015CR2032
2010-2013CR2032
2006-2010CR2032



What battery is in a Honda Accord key fob?


The cover. Open Get this back cover and set it aside And that's the battery To get the battery. Out. You can just use your thumbnails. Or you can use your screwdriver Either way the battery.



What battery does a 2015 Honda Accord key fob take?


You'll also need a mini flathead screwdriver. So you can pry the battery out put your thumb on the battery.


Ryan's Auto Care

Ryan's Auto Care - East Jordan 103 State St East Jordan, MI 49727 231-222-2199
Ryan's Auto Care - Central Lake 7984 North St Central Lake, MI 49622 231-544-9894

Ask any car or truck owner in Central Michigan who they recommend. Chances are they will tell you Ryan's Auto Care.