Typically, you should budget about $300 to $900 per wheel for a wheel bearing replacement on a 2019 Honda Civic, depending on whether you’re replacing just the bearing or the entire hub assembly, and on local labor rates.
In the 2019 Civic, front wheel hub assemblies are the most common failure point, while rear bearings fail less often. The final price varies with the type of part used (aftermarket vs. OEM), the shop’s labor rate, and whether additional components (like rotors or brakes) require service during the job.
What drives the price
The following ranges reflect typical costs you’ll encounter in the United States for common Civic wheel bearing work. They’re a guide to what you might expect when shopping around.
- Front wheel hub assembly replacement (bearing integrated into the hub): commonly about $400–$900 per wheel, including parts and labor. The exact figure depends on aftermarket vs. OEM parts and the shop’s hourly rate.
- Rear wheel hub assembly replacement (bearing integrated into the hub): commonly about $350–$800 per wheel, depending on parts and labor costs.
Prices can vary by region and shop, and dealer service centers often charge toward the upper end of these ranges. Always ask for an itemized estimate that shows parts, labor, and any additional fees.
What to expect specifically for a 2019 Honda Civic
For a 2019 Civic, the most common scenario is replacing the entire hub assembly rather than just the bearing, since many hub assemblies include the bearing as a single unit. Here’s how the costs typically break down in practice.
- Front hub assembly replacement: roughly $500–$900 per wheel at independent shops, and often $700–$1,000 or more at a dealership, depending on parts choice (aftermarket vs. OEM) and local labor rates.
- Rear hub assembly replacement: roughly $400–$800 per wheel at independent shops; dealership pricing tends to be higher, reflecting OEM part costs and service charges.
- Parts choice and warranty: aftermarket hub assemblies are usually cheaper and come with shorter or longer warranties depending on the brand; OEM parts are pricier but may offer factory warranty and longer compatibility assurance.
Getting an itemized quote before work begins is the best way to avoid surprises, and you may save by comparing a few estimates from independent shops versus the dealership.
Tips for getting a fair price
Ask for a written, line‑by‑line estimate, confirm whether the quote covers a full hub assembly replacement or a bearing service, and inquire about warranties on parts and labor. If possible, request a breakdown showing labor hours, hourly rate, and any added fees.
Additionally, consider having brakes inspected at the same time; sometimes rotor or caliper work is advisable if you’re already disassembling the hub, which can save labor costs in the long run.
Summary
For a 2019 Honda Civic, wheel bearing replacement costs typically fall in the $300–$900 range per wheel, with front hub assemblies usually being the pricier option. Prices vary by region, shop, and whether OEM or aftermarket parts are used. Always obtain an itemized quote, compare multiple shops, and consider warranties when making your decision.