The 2017 Honda Accord uses M12x1.5 lug nuts with a 60-degree conical (acorn) seat. They are tightened with a 19 mm socket, and the typical torque specification is about 80–85 ft-lbs (108–115 Nm). Always verify the exact figure on the door placard or in the owner's manual, especially if aftermarket wheels are involved.
Specifications at a glance
Below is a concise reference for the stock wheel setup and common maintenance measurements.
- Thread size: M12 x 1.5
- Seat type: 60-degree conical (acorn) seat
- Socket size to install/remove: 19 mm
- Recommended torque: 80–85 ft-lbs (108–115 Nm)
Notes: These specifications apply to the stock wheels on most 2017 Accord models. If your car has aftermarket wheels or spacers, verify compatibility and re-torque to the appropriate specification.
Details and practical considerations
Thread size and seat type
The M12 x 1.5 thread size is standard for the 2017 Accord’s wheel studs, paired with a 60-degree conical seat. This seating style helps center the wheel and ensures proper clamping force when the lug nuts are tightened.
Tooling and torque
Use a 19 mm socket or lug wrench to install or remove the lug nuts. Tighten to the recommended 80–85 ft-lbs (108–115 Nm) in a star pattern to ensure even load distribution. Recheck torque after a short drive as the nuts may settle.
Note: If you have aftermarket wheels, consult the wheel manufacturer for the correct lug nut size and torque specification, as some setups use different seat types or thread sizes.
Additional considerations
The 2017 Honda Accord uses a 5x114.3 mm bolt pattern, which is a separate specification from lug nut size but is important when selecting wheels. Always use OEM or OEM-equivalent lug nuts and hardware for best safety and performance.
Summary
For the 2017 Honda Accord, expect M12x1.5 lug nuts with a 60-degree conical seat, tightened with a 19 mm socket to about 80–85 ft-lbs (108–115 Nm). Verify exact figures on the door placard or owner's manual and be mindful of any aftermarket wheel configurations that may change hardware requirements.