Skip to Content
103 State St East Jordan, MI, 49727
  • MON: Closed
  • TUES: 8:00AM - 6:00PM
  • WED: 8:00AM - 6:00PM
  • THUR: 8:00AM - 6:00PM
  • FRI: 8:00AM - 6:00PM
  • SAT: Closed
  • SUN: Closed
MORE >
  • Yelp
  • Google Business Profile
  • Facebook
7984 North St Central Lake, MI, 49622
  • MON: 8:00AM - 6:00PM
  • TUES: 8:00AM - 6:00PM
  • WED: 8:00AM - 6:00PM
  • THUR: 8:00AM - 6:00PM
  • FRI: Closed
  • SAT: Closed
  • SUN: Closed
MORE >
  • Yelp
  • Google Business Profile
  • Facebook

How much does a starter cost for a 2006 Honda CR-V?

A replacement starter for a 2006 Honda CR-V typically costs about $150–$400 for the part itself, with the total installed price usually ranging from $300–$700 depending on the brand, warranty, and labor rates.


For a 2006 CR-V, the exact cost you’ll pay depends on whether you choose a remanufactured, aftermarket, or OEM (new) starter, and on local labor rates. The following breakdown summarizes common pricing you’ll see from U.S. retailers and repair shops and helps you compare options before committing to a purchase or service appointment.


Starter part price ranges


Prices vary by brand and condition. The following ranges reflect common options available in the United States at retailers and auto parts stores.



  • Remanufactured unit: typically $100–$250

  • New OEM (genuine Honda) or equivalent: usually $180–$350

  • Aftermarket new starter (non-OEM): roughly $120–$260


Conclusion: The part price is the primary variable. Remanufactured starters offer substantial savings, while OEM/new units tend to carry longer warranties and the simplest compatibility.


Labor and installation costs


Labor costs depend on shop rates and the time required to access the starter, which is typically a straightforward job but can vary with engine layout and accessory clearance.



  • Labor time: commonly 1.0–2.5 hours

  • Labor rate: about $75–$150 per hour in many U.S. regions; higher in urban areas

  • Estimated installed cost: roughly $150–$350 for labor, depending on location and complexity


Conclusion: Most customers report a total installed price in the ballpark of $300–$700, with higher costs in markets with steep labor rates or when OEM parts are chosen.


What affects price and value


Additional factors to consider include the starter’s warranty length, the age and condition of related electrical components (cables, battery, and mounting hardware), and whether any related failures (such as the alternator or ignition wiring) may need attention at the same time.


Where to shop and what to ask


To get an accurate quote, check with local auto parts retailers (for example, AutoZone, Advance Auto Parts, RockAuto) and nearby repair shops. Ask for an itemized estimate that includes part and labor, confirm compatibility with your specific CR-V engine code and trim, and inquire about warranty terms on remanufactured vs. new OEM starters.


Conclusion: Getting multiple quotes helps you compare price, warranty, and timing, ensuring you buy the right starter for your 2006 CR-V and avoid surprise charges later.


Summary


For a 2006 Honda CR-V, plan for about $150–$400 for the starter itself and roughly $150–$350 for labor, yielding an installed total commonly between $300 and $700. Your exact price will hinge on part type (remanufactured, aftermarket, or OEM), local labor rates, and any additional related repairs. Shopping around and verifying compatibility with your engine variant will help you secure the best value.

Ryan's Auto Care

Ryan's Auto Care - East Jordan 103 State St East Jordan, MI 49727 231-222-2199
Ryan's Auto Care - Central Lake 7984 North St Central Lake, MI 49622 231-544-9894

Ask any car or truck owner in Central Michigan who they recommend. Chances are they will tell you Ryan's Auto Care.