The lug nuts are M12 x 1.5 with a 19mm wrench size, and the wheels use a 5-lug setup in a 5x114.3 mm bolt pattern.
In more detail, this specification covers the factory wheel configuration for the 2015 Honda Fit. If your vehicle has aftermarket wheels, verify compatibility with the wheel manufacturer and refer to the owner’s manual for any deviations from the stock setup.
Key lug-nut specifications for the 2015 Honda Fit
The following list summarizes the essential specs you’re likely to need for maintenance, replacement lug nuts, or wheel work.
- Thread size: M12 x 1.5
- Seat type: Conical (60-degree) seating
- Bolt pattern: 5 x 114.3 mm (5 x 4.5 in)
- Hex size: 19 mm (socket size for lug wrench)
- Number of nuts per wheel: 5
These specs apply to the factory wheels commonly found on the 2015 Honda Fit. If aftermarket wheels are installed, always confirm compatibility with the wheel manufacturer and consult the owner’s manual for any variations.
Install and torque considerations
Torque specification
When re-installing wheels, tighten lug nuts to 80 ft-lbs (108 Nm) in a star or crisscross sequence to ensure even seating. It’s good practice to re-check torque after 50–100 miles of driving or per the wheel/tire manufacturer’s guidance.
Summary
For a 2015 Honda Fit, use M12 x 1.5 lug nuts with a 19 mm wrench, five nuts per wheel, on a 5x114.3 mm bolt pattern. Tighten to about 80 ft-lbs in a crisscross pattern to ensure proper seating and safety.