The lug nuts for a 2014 Chevy Cruze are M12 x 1.5 with a 60-degree conical (acorn) seat, used five per wheel, tightened to about 100 ft-lb (135 N·m) with a 19 mm wrench/socket.
Key specifications you should know
The following details cover the essential specifications for Cruze lug nuts to help you verify fitment or perform a wheel service.
- Wheel bolt pattern: 5 lug nuts on a 105 mm bolt circle (5x105 mm).
- Thread size: M12 x 1.5 (12 mm diameter with 1.5 mm thread pitch).
- Seat type: 60-degree conical (acorn) seat.
- Hex size (socket/wrench): 19 mm (approximately 3/4 inch).
- Number of lug nuts per wheel: 5.
- Recommended tightening torque: about 100 ft-lb (135 N·m).
These specifications reflect common factory configurations for the Cruze across model years around 2011–2016, including the 2014 model. Always verify with your vehicle’s owner manual or a service bulletin if you’re using aftermarket wheels or if you’re unsure about a specific wheel option for your car.
Concluding note: When replacing wheels or lug nuts, ensure the bolt pattern matches, the seat type is compatible with the wheel, and torque is applied as specified to ensure safe installation.
Verification and practical tips
If you’re unsure about any of the specs on your particular Cruze, check the glovebox manual, the service manual, or the wheel/wrench requirements printed on the factory lug nuts. When performing a tire change, use a torque wrench to re-torque after driving 50–100 miles to account for settling.
Summary
For a 2014 Chevy Cruze, expect M12 x 1.5 lug nuts with a 60-degree conical seat, five per wheel, tightened to roughly 100 ft-lb (135 N·m) using a 19 mm socket. The bolt pattern is 5x105 mm, and the lug nuts are designed for a 60-degree conical seat and a 19 mm wrench. Always confirm with the owner’s manual or service data if you’re using aftermarket wheels or non-standard hardware.