Skip to Content
103 State St East Jordan, MI, 49727
  • MON: Closed
  • TUES: 8:00AM - 6:00PM
  • WED: 8:00AM - 6:00PM
  • THUR: 8:00AM - 6:00PM
  • FRI: 8:00AM - 6:00PM
  • SAT: Closed
  • SUN: Closed
MORE >
  • Yelp
  • Google Business Profile
  • Facebook
7984 North St Central Lake, MI, 49622
  • MON: 8:00AM - 6:00PM
  • TUES: 8:00AM - 6:00PM
  • WED: 8:00AM - 6:00PM
  • THUR: 8:00AM - 6:00PM
  • FRI: Closed
  • SAT: Closed
  • SUN: Closed
MORE >
  • Yelp
  • Google Business Profile
  • Facebook

What size bulb for 2015 Honda CRV low beam?

The low-beam bulb size for the 2015 Honda CR-V is the H11 bulb. This article explains the exact size, common variations, and practical tips for replacement and upgrades.


Low-beam bulb specification for the 2015 CR-V


On most 2015 CR-V models, the low-beam headlight uses an H11 bulb (55W). The high beam typically uses a 9005 bulb for reference. Because configurations can vary by market or trim level, always verify with your owner's manual or the label inside the headlight housing before purchasing bulbs.


Key bulb size at a glance



  • Low-beam: H11 (55W) standard halogen bulb

  • High-beam: 9005 (HB3) for reference

  • LED/HID upgrades: may require compatibility checks with housing, wiring, and CAN-bus systems


Note that variations can occur by market or trim; always verify with your manual or parts diagram before ordering replacements.


Replacement steps for the H11 low-beam bulb


If you need to replace the low-beam bulb, follow these general steps. They apply to most 2015 CR-V headlight assemblies, but always refer to your specific vehicle's service manual for exact instructions.



  1. Park the vehicle on a level surface and turn off the engine. Open the hood and locate the headlight assembly.

  2. Remove the dust cap from the back of the headlight housing to access the bulb.

  3. Unplug the electrical connector from the bulb carefully.

  4. Release the bulb from its retaining clip or housing by releasing the clip or turning the bulb as required.

  5. Install the new H11 bulb, ensuring the base seats properly and the alignment tabs engage correctly.

  6. Reconnect the electrical connector and replace the dust cap. Test the headlights to confirm proper operation.


Handle bulbs with clean hands or wear gloves to avoid transferring oils from skin onto the glass, which can shorten bulb life. If you’re unsure or uncomfortable with the replacement, consult a professional.


Notes on compatibility and upgrades


LED or HID upgrade considerations


Upgrading to LEDs or HIDs for the 2015 CR-V may require additional components such as resistors, ballasts, or CAN-bus adapters. These upgrades can affect headlight aim and electrical load, so verify compatibility with your vehicle’s electrical system and housing clearance before purchasing. Professional installation is recommended for most non-HID-compatible housings.


Summary


The standard low-beam bulb for the 2015 Honda CR-V is the H11 halogen bulb. While H11 is typically correct, confirm via the owner’s manual or the headlight housing label since regional or trim differences can exist. Replacement is straightforward with basic steps, and any upgrade to LED or HID should be approached with attention to compatibility and safety.

Ryan's Auto Care

Ryan's Auto Care - East Jordan 103 State St East Jordan, MI 49727 231-222-2199
Ryan's Auto Care - Central Lake 7984 North St Central Lake, MI 49622 231-544-9894

Ask any car or truck owner in Central Michigan who they recommend. Chances are they will tell you Ryan's Auto Care.