For a 2012 Honda Accord, the Fram part number most commonly recommended is PH7317 for the four‑cylinder 2.4L engine, with XG7317 as a higher‑capacity alternative. The 3.5L V6 can also be listed as compatible with PH7317 in Fram’s references, but exact fit can vary by engine and market, so always verify with Fram’s catalog or packaging for your specific vehicle.
Engine options and Fram compatibility
The Accord lineup for 2012 included both a 2.4L four‑cylinder and a 3.5L V6. The oil filter you choose should match your engine type, and Fram provides a couple of standard options that cover most configurations. The following outlines the commonly suggested Fram numbers and notes for each engine option.
Four‑cylinder 2.4L (K‑series)
- PH7317 — Fram Extra Guard; widely recommended for the 2.4L Accord.
- XG7317 — Fram Ultra; higher‑capacity option for the same engine family.
- Note: Some regional listings or submodel variants may present additional cross‑references; packaging or Fram’s official site will confirm the exact fit for your VIN.
In practice, PH7317 is the baseline Fram number for most 2012 Accords with the 2.4L engine, and XG7317 provides an upgrade in filtration capacity while maintaining compatibility.
Three‑point‑five‑liter V6 (3.5L)
- PH7317 — Fram Extra Guard; commonly listed as fitting several 3.5L Honda/J‑series applications in Fram’s catalogs.
- XG7317 — Fram Ultra; available as a higher‑capacity option for the same engine family.
- As with the 4‑cylinder, exact fit can vary by trim or regional market; always verify with Fram’s fitment guide or the packaging for your specific vehicle to ensure the correct number.
Fram’s cross‑reference materials often include PH7317 and XG7317 as fitting options for the 3.5L V6 in the Accord, but confirmation through Fram’s official resources is recommended before purchase.
How to confirm the correct Fram filter
To be certain you have the right part, check the following: the engine code (K24 for the 2.4L or J35 for the 3.5L), your VIN, and the exact filter packaging. Fram’s official website provides a fitment lookup tool and cross‑references that map to many Honda/Acura applications. If in doubt, bring the existing filter to an auto parts store or consult Fram’s customer support for a definitive match.
Summary
For the 2012 Honda Accord, the primary Fram filter numbers are PH7317 and XG7317. PH7317 covers the standard 4‑cylinder 2.4L, while XG7317 offers higher filtration capacity. The 3.5L V6 commonly uses these same numbers in Fram’s cross‑references, but always verify against your VIN and engine code to ensure exact compatibility. When in doubt, consult Fram’s catalog or packaging to lock in the correct part for your specific car.