The oil filter for a 1998 Toyota Camry V6 (3.0L, 1MZ-FE) is Toyota part number 90915-YZZD4. This is the standard filter used on Camrys with the 1MZ-FE V6 from that era, and aftermarket options exist that serve as compatible replacements.
Engine and filter compatibility
The 1998 Camry V6 uses the 1MZ-FE 3.0-liter V6 engine. This engine family shares the same oil filter design across late-1990s Camry V6 models, which is why 90915-YZZD4 is the commonly cited OEM filter for these vehicles. If you have a non-US market car or a unique production run, always verify against your VIN or local parts catalog.
OEM part number
The official Toyota OEM oil filter for the 1998 Camry V6 is 90915-YZZD4. Using the exact OEM number helps ensure proper thread fit, gasket seating, and filtration capacity for the 1MZ-FE engine.
- 90915-YZZD4
Note: Some regional catalogs or very early 1998 builds can show variations in listing. If in doubt, consult a Toyota dealer or reference the VIN-specific parts catalog for your market.
Common aftermarket cross-references
If you prefer aftermarket filters that fit the 1MZ-FE V6, choose products that explicitly list compatibility with Toyota 3.0L V6 1MZ-FE or Camry with a 3.0L engine. These brands are commonly used for this application:
- Wix
- Bosch
- Purolator
- Fram
When shopping aftermarket, verify the exact model number and cross-reference to ensure it matches the 1MZ-FE 3.0L Camry application for your year and market.
How to verify the correct filter for your car
To minimize mistakes, follow these steps to confirm the right filter for your specific vehicle:
- Check the oil filter on the engine for the part number printed on the canister to confirm a direct match.
- Compare thread size and gasket diameter to the 90915-YZZD4 specification (typical for this engine, but verify against your filter).
- Use your VIN in Toyota's official parts catalog or ask a dealership to confirm the exact part number for your market and production date.
- Ensure the filter’s filtration rating and capacity suit your maintenance needs; some aftermarket options offer different filtration media.
Concluding note: Regardless of OEM or aftermarket choice, install the filter correctly, torque the filter as recommended, and dispose of used oil properly.
Summary
For a 1998 Toyota Camry V6 with the 1MZ-FE engine, the standard oil filter number is 90915-YZZD4. This OEM part provides the correct fit and filtration for most US-spec Camrys of that era. If shopping aftermarket, look for filters labeled compatible with Toyota 3.0L V6 1MZ-FE and verify with your VIN or parts catalog to ensure exact fit for your vehicle's market and production date.